Servomotor Installation; Orientation; Installation Standards - YASKAWA Sigma-V Series User Manual

3.2

Servomotor Installation

3.2.1

Orientation

The mounting orientation depends on the method that is used to install the servomo-
tor. The allowable mounting orientations are given in the follow table.
Mounting Method
Flange-mounted
Foot-mounted
3.2.2

Installation Standards

The motor rated specifications (rated output, rated torque, and rated speed) are the
continuous allowable values at an ambient temperature of 40°C when servomotors
are installed with heat sinks.
For more information on heat sinks, refer to Large-Capacity
alog.
If the heat sink is small, the temperature of the servomotor can increase greatly. If the
servomotor is surrounded by a case or if there are objects that generate heat near the
servomotor, the temperature of the servomotor can increase greatly.
Always check the temperature of the servomotor on the actual equipment before
actual operation.
Holding Brake Allowable Mounting Orientations
No Horizontal or vertical
Yes
No Horizontal
Yes

3.2 Servomotor Installation

Σ
-V Series Product Cat-
3-5