YASKAWA Sigma-V Series User Manual page 14

 Maintenance and Inspection
 Disposal
 General Precautions
• The products shown in illustrations in this manual are sometimes shown without
covers or protective guards. Always replace the cover or protective guard as
specified first, and then operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match
the product you received.
• If the manual must be ordered due to loss or damage, inform your nearest
Yaskawa representative or one of the offices listed on the back of this manual.
xiv
• Never disassemble a multi-winding drive unit, SERVOPACK, or converter.
Failure to observe this caution may result in electric shock or injury.
• Do not change any wiring while power is being supplied.
Failure to observe this caution may result in electric shock or injury.
• When replacing the multi-winding drive unit, resume operation only after
copying the previous multi-winding drive unit parameters to the new multi-
winding drive unit.
Failure to observe this caution may result in damage to the product.
• Be sure to eliminate static electricity before operating buttons and switches
inside the plastic cover.
Failure to observe this caution may result in damage to the product.
• When disposing of the products, treat them as ordinary industrial waste.
Observe the following general precautions
to ensure safe application.
CAUTION
CAUTION