Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch VIPX1A
Summary of Contents for Bosch VIPX1A
- Page 1 VIP X1/VIP X2 – Network video server...
- Page 2 These instructions "Quick Installation Guide" refer to the units VIP X1 and VIP X2, both in basic and in audio version. The title shows the basic versions of VIP X1 and VIP X2. In the drawings the VIP X1 in audio version is displayed standing for all versions. Bosch Security Systems | 2006-05 | V2.0...
-
Page 3: Contents Of Delivery
Contents of Delivery • VIP X1 (or VIP X2) Network Video Server, basic version or audio version • Power outlet with four primary adapters • Configuration cable • CD-ROM • Quick Installation Guide Bosch Security Systems | 2006-05 | V2.0... -
Page 4: Unpack The Box
VIP X1/VIP X2 | Quick Installation Guide 1. Unpack the Box • Please check the delivery for completeness and integrity. • Have your unit checked by Bosch Security Systems if you detect any damages! Bosch Security Systems | 2006-05 | V2.0... -
Page 5: Connect The Camera
2. Connect the Camera • VIP X1: Connect the camera with the Video In socket. • VIP X2: Connect one camera to each, the Video In 1 socket and the Video In 2 socket. Bosch Security Systems | 2006-05 | V2.0... - Page 6 VIP X1/VIP X2 | Quick Installation Guide 3. Connect the Audio Components (Audio Versions Only) • Use the jack sockets for audio line connections. • Connect the microphone and the speaker connection to the corresponding terminals. Bosch Security Systems | 2006-05 | V2.0...
-
Page 7: Connect The Serial Connector
• Connect the spring clamp connector to the orange socket of the unit. • Connect the configuration cable with a serial interface of the computer. Bosch Security Systems | 2006-05 | V2.0... - Page 8 VIP X1/VIP X2 | Quick Installation Guide 5. Connect the Alarm Switches and the Relay Connections • Connect the alarm switches to the corresponding terminals. • Connect the relay connections to the corresponding terminals. Bosch Security Systems | 2006-05 | V2.0...
-
Page 9: Connect To The Network
• Connect the unit to the network via the ETH socket. • Make sure that the power outlet is provided with the correct primary adapter and plug the power outlet into a suitable mains outlet. Bosch Security Systems | 2006-05 | V2.0... -
Page 10: Configure The Ip Address
• Enter the desired IP address (e.g. 192.168.0.30) in the Unit IP address field and click the but- ton Set at the bottom on the right. The new IP address is valid after a reboot of the unit. Bosch Security Systems | 2006-05 | V2.0... -
Page 11: Test The Configuration
Note: The graphic adapter of your computer must be set to 16 bits or 32 bits color depth, other- wise the video pictures cannot be displayed. • Use the links on top of the pages to navigate through the pages. Bosch Security Systems | 2006-05 | V2.0... - Page 12 Bosch Sicherheitssyteme GmbH Bosch Security Systems B.V. Robert-Koch-Straße 100 P.O. Box 80002 85521 Ottobrunn 5600 JB Eindhoven Germany The Netherlands www.bosch-sicherheitssysteme.de www.boschsecuritysystems.com © 2006 Bosch Sicherheitssysteme GmbH Subject to change. Printed in Germany. 2501B/0506/QIG_en/3d...