Mounting Of Battery - Mitsubishi Electric Melsec-Q172DCPU User Manual

4 INSTALLATION AND WIRING

4.3 Mounting of Battery

(1) Handling the battery lead wire
(a) Q173DSCPU/Q172DSCPU
1) Precautions for mounting the battery
• Set the battery to the battery holder correctly after confirming "+" side
and "-" side for the battery.
2) Precautions for handling the battery lead wire
• For connection or removal of the battery lead wire, do it surely while
holding a battery lead connector.
"+" side
Battery lead connector
Do not hold lead wire
3) Connection of the battery lead wire
• For connection of a battery (Q6BAT), connect it surely to a battery
connector while holding a battery lead connector. Be sure to insert it
until it clicks.
4) Removal of the battery lead wire
• For removal of the battery lead wire, pull out it while holding a battery
lead connector.
Q6BAT
Battery lead wire
4 - 21
Battery connector
L I T H I
Battery holder