Mitsubishi Electric Melsec-Q172DCPU User Manual page 80

2 SYSTEM CONFIGURATION
Power supply modules specifications (Q63P, Q64P, Q64PN, Q61P-D)
Item
Base loading position
Applicable base unit
Input power supply
Input frequency
Input voltage distortion factor
Max. input apparent power
Inrush current
5VDC
Rated output current
24VDC
Overcurrent protection 5VDC
24VDC
(Note-1)
5VDC
Overvoltage protection
24VDC
(Note-2)
Efficiency
Allowable momentary power failure
(Note-3)
time
Dielectric withstand voltage
Insulation resistance
Noise durability
Operation indication
Fuse
Application
Rated switching
voltage/current
Contact
Minimum switching
output
load
section
Response time
Life time
Surge suppressor
Fuse
Terminal screw size
Applicable wire size
Q63P
Q35DB, Q38DB, Q312DB, Q63B, Q65B, Q68B, Q612B
100 to 120VAC/200 to
24VDC (+30%/-35%) 240VAC (+10%/-15%)
(15.6 to 31.2VDC) (85 to 132VAC/170 to
——
——
45W
100A 1ms or less
(at 24VDC input)
6A
——
6.6A or more
10ms or less (at
24VDC input)
510VAC per minute
across inputs/LG and
outputs/FG
(Altitude 0 to 2000m (0
to 6561.68ft.))
10M or more by
Across inputs and outputs, across inputs and LG, across outputs and FG
insulation resistance
10M or more by insulation resistance tester (500VDC)
tester
By noise simulator of
• By noise simulator of 1,500Vp-p noise voltage, 1 µ s noise width and 25 to
500Vp-p noise voltage,
1 µ s noise width and 25
60Hz noise frequency
to 60Hz noise • Noise voltage IEC61000-4-4, 2kV
frequency
LED indication
(Normal: ON (Green), (Normal: ON (Green),
Error: OFF)
Error: OFF)
OFF to ON: 10ms or less. ON to OFF: 12ms or less
Electrical: 100 thousand times or more at rated switching voltage/current
2 - 47
Q64P
Q series power supply module loading slot
264VAC)
50/60Hz ±5%
160VA
20A 8ms or less
8.5A
9.9A or more
——
5.5 to 6.5V
——
70% or more
20ms or less
Across inputs/LG and outputs/FG
2300VAC per minute
(Altitude 0 to 2000m (0 to 6561.68ft.))
LED indication LED indication
(Normal: ON (Green),
(Note-5)
Built-in (Unchangeable by user)
ERR. contact
24VDC, 0.5A
5VDC, 1mA
Mechanical: 20 million times or more
None
None
M3.5 screw
2
0.75 to 2mm
Q64PN Q61P-D
100 to 240VAC (+10%/-15%)
(85 to 264VAC)
5% or less
130VA
(Note-4)
——
6.6A or more
LED indication
(POWER LED, LIFE
Error: OFF) LED)
ERR. contact,
LIFE OUT contact
6A
(Note-6)