Table 7-2 Meaning Of The Switch Settings Of Dummy Module Dm 370 - Siemens SIMATIC S7-300 Manual

Other signal modules
7.3 Dummy module DM 370; (6ES7370-0AA01-0AA0)
Switch settings for addressing
The table below shows how to set the switch on the rear panel of the module, according to
the module type.
Table 7-2 Meaning of the switch settings of dummy module DM 370
Switch setting
Technical data of DM 370
Technical data
Dimensions and weight
Dimensions W x H x D (mm)
Weight
Voltages, currents, electrical potentials
Current consumption from the backplane bus
Power loss
7-6
Meaning
The dummy module reserves one slot.
The module will not be configured, and
does not use any address space.
The dummy module reserves one slot.
The module must be configured and
occupies 1 byte in the input address space
(system default: not in the process image.)
Use
Without active backplane bus: For configurations
•
where a single slot is physically reserved, with
electrical connection to the S7-300 bus.
With active backplane bus: No
•
For configurations where an addressed slot is
reserved.
40 x 125 x 120
approx. 180 g
approx. 5 mA
typ. 0.03 W
S7-300 Automation System Module data
Manual, 08/2006, A5E00105505-04