Digital Output Module Sm 322; Do 16 X Uc 24/48 V; (6Es7322-5Gh00-0Ab0) - Siemens SIMATIC S7-300 Manual

Digital modules

3.21 Digital output module SM 322; DO 16 x UC 24/48 V; (6ES7322-5GH00-0AB0)

Technical data
Wiring two outputs in parallel
for redundant load control
•
for performance increase
•
Control of a digital input
Switching frequency
with resistive load
•
with inductive load to IEC 947-5-1, DC 13
•
with lamp load
•
Internal limiting of the inductive shutdown voltage to
Short circuit-proof output
Threshold
•
Wiring the actuators
3.21 Digital output module SM 322; DO 16 x UC 24/48 V;
3.21
(6ES7322-5GH00-0AB0)
Order number
6ES7322-5GH00-0AB0
Properties
Properties of the SM 322; DO 16 x UC24/48 V digital output module:
● 16 electrically isolated static relay outputs
● Electrical isolation between channels of 120 V
● Switching characteristics: R
● Designed for load voltages up to 48 V AC or DC, no minimum load voltage
● Designed for output loads up to 0.5 A, no minimum load current
● Outputs are fully independent and support any wiring configuration
● Set substitution values or "Hold last values" can be programmed at the outputs for CPU
● The module supports diagnostics of programming errors and of external power failure
● Suitable for AC solenoids, actuators, motor starters, FHP motors and signal lamps
3-60
than 100 GOhm
STOP.
supported (only outputs of the same group)
not supported
supported
max. 1000 Hz
max. 0.5 Hz
max. 10 Hz
typ. L + (-53 V)
Yes, electronic
typ. 1 A
with 20-pin front connector
ON is typically 0.25 Ohm, and R
DS
OFF is typically greater
DS
S7-300 Automation System Module data
Manual, 08/2006, A5E00105505-04