Parameters Of Analog Io Modules - Siemens SIMATIC S7-300 Manual

Parameter sets of signal modules
A.11 Parameters of analog IO modules
Output type and output range
The table lists the output types/ranges of SM 332; AO 8 x 12 Bit, including their codes. Enter
these codes at bytes 2 to 9 in data record 1 (refer to the previous figure.)
Table A-31 Output range codes of analog output module SM 332; AO 8 x 12 Bit
Output type
Disabled
Voltage
Current
A.11

Parameters of analog IO modules

A.11
Parameters
The table below lists all parameters you can set for analog IO modules.
The comparison illustrates the editable parameters:
● in
● using SFC 55 "WR_PARM"
Parameters set in
(refer to the
Table A-32 Parameters of analog IO modules
Parameters
Measuring method
Measuring range
Integration time
Output type
Output range
A-40
Code
2#0000
2#0001
2#0010
STEP 7
STEP 7
can also be transferred to the module using SFC 56 and SFC 57
STEP 7
manuals).
Output range
Disabled
1 V to 5 V
0 V to 10 V
± 10 V
0 mA to 20 mA
4 mA to 20 mA
± 20 mA
Data record number Programmable, using ...
... SFC 55
1 Yes
Yes
Yes
Yes
Yes
Code
2#0000
2#0111
2#1000
2#1001
2#0010
2#0011
2#0100
... PG
Yes
Yes
Yes
Yes
Yes
S7-300 Automation System Module data
Manual, 08/2006, A5E00105505-04