Table Of The Settings; Settings For Commissioning - Siemens SIMOVERT MASTERDRIVES MC Series Product Information

Commissioning

4.2 Table of the settings

4.2 Table of the settings

Settings for commissioning

You will require this data for the following commissioning steps. As preparation, you can
define the values using this table.
DP cycle
Specify Encoder
Referencing mode
"Measuring" function
Encoder type (Order No.)
Rated motor speed/max. speed, axis
Master application cycle/position controller
clock cycle
Telegram type (refer to the decision table)
PROFIBUS address
14
________ ms
❑ Incremental encoder
❑ Absolute encoder
❑ Reference cam + encoder zero mark
❑ Only encoder zero mark
❑ Only reference cam
❑ 1. Zero position to the right of the
reference cam
❑ 1. Zero position to the left of the
reference cam
❑
1Fxxxxx- _ xxxx-x _ xx
______ 1/min
______
______
______
Connecting SIMOVERT MASTERDRIVES MC to the Technology-CPU
Product Information, 03/2008, A5E00272072-05