Power Supply Module Ps 307; 2 A; (6Es7307-1Ba00-0Aa0) - Siemens SIMATIC S7-300 Manual

Power supply modules

2.2 Power supply module PS 307; 2 A; (6ES7307-1BA00-0AA0)

Technical data
Output current
Rated value
•
Short-circuit protection
Residual ripple
Electrical parameters
Safety class to IEC 536 (DIN VDE 0106, Part 1)
Isolation rating
Rated isolation voltage (24 V to input)
•
Test voltage
•
Safety isolation
Buffering of power supply failure (at 24/48/72/96/110 V)
Repeat rate
•
Efficiency
Power consumption
Power loss
Diagnostics
"Output voltage present" display
at a limited input voltage range > 24 V (DC 24 ... 138 V), PS 305 can be loaded to 3 A.
1)
2.2 Power supply module PS 307; 2 A; (6ES7307-1BA00-0AA0)
2.2
Order number
6ES7307-1BA00-0AA0
Properties
Properties of the PS 307; 2 A power supply module:
● Output current 2 A
● Output voltage 24 VDC; short circuit-proof, open circuit-proof
● Connection to singlephase AC mains
● Safety isolation to EN 60 950
● May be used as load power supply
2-4
(rated input voltage 120/230 VAC, 50/60 Hz)
2 A;
1)
parallel connection supported
electronic, non-latching, 1.65 to 1.95 x I
max. 150 mV
pp
I, with protective conductor
150 VAC
2800 VDC
SELV circuit
> 10 ms
min. 1 s
75 %
64 W
16 W
yes, green LED
S7-300 Automation System Module data
Manual, 08/2006, A5E00105505-04
N