Simulator Module Sm 374; In/Out 16; (6Es7374-2Xh01-0Aa0) - Siemens SIMATIC S7-300 Manual

Other signal modules

7.2 Simulator module SM 374; IN/OUT 16; (6ES7374-2XH01-0AA0)

7.2 Simulator module SM 374; IN/OUT 16; (6ES7374-2XH01-0AA0)
7.2
Order number
6ES7374-2XH01-0AA0
Properties
Properties of simulator module SM 374; IN/OUT 16:
● Simulation of:
● Status displays for the simulation of inputs and outputs
● Function adjustable with screwdriver
Note
Do not operate the function selection switch in RUN!
STEP 7
Configuration in
The simulator module SM 374; IN/OUT 16 is not included in the
STEP 7
module function required for your configuration as follows:
● To use the SM 374 with 16 inputs, define the order number of a digital input module with
● To use the SM 374 with 16 outputs, define the order number of a digital output module
● To use the SM 374 with 8 inputs and 8 outputs, define the order number of a digital
7-2
– 16 inputs or
– 16 outputs or
– 8 inputs and 8 outputs (each with the same start addresses!)
therefore does not recognize the SM 374 order number. "Simulate" the simulator
STEP 7
16 inputs in ,
for example: 6ES7321-1BH02-0AA0
STEP 7
with 16 outputs in
for example: 6ES7322-1BH01-0AA0
input/output module with 8 inputs and 8 outputs in
for example: 6ES7323-1BH00-0AA0
,
STEP 7
module catalog.
STEP 7
,
S7-300 Automation System Module data
Manual, 08/2006, A5E00105505-04