Siemens SIMATIC S7-300 Manual page 171

3.34 Digital IO module SM 327; DI 8/DO 8 x DC 24 V/0.5 A; programmable (6ES7327-1BH00-0AB0)
Technical data
Actuator selection data
Output voltage
with "1" signal
•
Output current
with "1" signal
•
Rated value
Permissible range
with "0" signal (residual current)
•
Output delay (resistive load)
at "1" to "0"
•
at "1" to "0"
•
Load resistance range
Lamp load
Wiring two outputs in parallel
for redundant load control
•
for performance increase
•
Control of a digital input
Switching frequency
with resistive load
•
with inductive load to IEC 947-5-1, DC 13
•
with lamp load
•
Internal limiting of the inductive shutdown voltage to
Short circuit-proof output
Threshold
•
Wiring the actuators
S7-300 Automation System Module data
Manual, 08/2006, A5E00105505-04
min. L+ (-1.5 V)
0.5 A
5 mA to 0.6 A
max. 0.5 mA
max. 350 μs
max. 500 μs
48 Ω to 4 kΩ
max. 5 W
supported
not supported
supported
max. 100 Hz
max. 0.5 Hz
max. 10 Hz
typ. L + (-54 V)
Yes, electronic
typ. 1 A
With 20-pin front connector
Digital modules
3-123