Storage And Transport - ProMinent DULCOTROL DWCa Assembly And Operating Instructions Manual

Storage and Transport

4 Storage and Transport
Ambient conditions for storage and
transport
Storage period
Transport weight
20
CAUTION!
Danger of material damage
The device can be damaged by incorrect or
improper storage or transportation!
– The unit should only be stored or transported in
a well packaged state - preferably in its original
packaging.
– The packaged unit should also only be stored
or transported in accordance with the stipu‐
lated storage conditions.
– The packaged unit should be protected from
moisture and the ingress of chemicals.
Packaging material
Dispose of packaging material in an environmen‐
tally responsible way. All packaging components
carry the corresponding recycling code
CAUTION!
– Prior to storage or transport, ensure that the
system is free from feed chemical and water
– Flush out the wetted components including the
hoses using clean pure water
– Store and transport the system in its original
packaging
– Also protect the packaged systems against
damp, exposure to chemicals and mechanical
effects
– Please also observe the operating instructions
for fittings and other units, such as sensors, fil‐
ters, metering pumps ...
Storage temperature: + 5 ... 55 °C
Air humidity: < 90 % relative humidity, non-condensing
Humidity: None. Avoid rain and condensation.
Other: No dust, no direct sunlight.
NOTICE!
If the system is stored as an assembly with other
components, then the storage and transport condi‐
tions should be appropriate for the component with
the least resistance to external influences.
There is no limit to the storage period if no sensors are fitted.
The transport weight depends on the configuration of the meas‐
uring plate and is between 8 ... 13 kg.
.