2
2.1
The DMT on-site measurement transducer is designed exclusively for the
•
•
•
•
It is prohibited to use the device for any other applications or to modify it
in any way!
The device must not be used outdoors without added protection (housing,
weatherproof cover).
2.2
3
Store and transport the DMT in the original packaging.
Ambient conditions for storage and transport:
Temperature:
Humidity:
ProMinent
®
Safety
Correct use
measurement of pH value resp. redox potential
measurement of temperature
display of measured variables
production of an output signal
Safety guidelines
CAUTION
• The device must not be used in a possible explosion
area.
• The DMT must be operated by trained and authorised
personnel.
IMPORTANT
• The system must be suitably equipped and configured to
prevent overdosing of hazardous materials due to probe
failure.
• The DMT has no on/off switch. It starts to function as soon
as it is connected to a power supply.
Storage and transport
IMPORTANT
• Protect the DMT from damp and the effects of chemicals
even when packed.
Safety / Storage and transport
-20 °C to 70 °C
max. 95 % relative humidity,
non condensing
Page 9