Table of Contents
Advertisement
6.1.1 Measuring point
Fig. 4: Drilling template
Labelling
A
B
C
D
Select the mounting height so that:
The controller's LCD display can be easily read
n
The controller cover can still be parked in the "Park position"
n
There is still space for maintenance work underneath the
n
bypass fitting
There is sufficient room outside of the plate to fit accessories
n
The following drilling dimensions should be observed:
The selection of the measuring plate depends on the bypass fitting
used and the number of controllers used.
The following applies in principle:
with 1 controller: Size 1
n
with 2 controllers: Size 2
n
1 controller
745 mm
595 mm
705 mm
555 mm
Secure the DULCOTROL
possible to the point of injection using hanger bolts. Leave an ade‐
quate gap from the wall for the cables on the back of the plate.
Assembling the measuring point
2 controllers
800 mm
800 mm
760 mm
760 mm
measuring/control station, as close as
®
27
Advertisement
Table of Contents
