Dulcotrol; Bypass Fitting Dlg Iii - ProMinent DULCOTROL DWCa Assembly And Operating Instructions Manual

Overview of the measuring point

5.2 DULCOTROL

9.
8.
7.
Fig. 2: Bypass fitting DLG III
1. Controller
2. Terminal box with main switch (depending on
the design of the measuring plate)
2a. Main switch (depending on the design of the
measuring plate)
3. Sampling tap
4. Sensor
5. Bypass fitting DLG with magnetic stirrer
(depending on the design of the measuring
plate)
22
® Measuring and Control Station with Bypass Fitting DLG III
The DULCOTROL
bypass fitting, flow sensor DLG III or DLG IV, is optimised for turbid
waste water and industrial process water and consists of 1 or 2
controllers, 1 ... 4 sensors and the bypass fitting DLG III (1 ... 3
sensors) or DLG IV (4 sensors) with integrated flow control. A filter
can optionally be fitted on the sample water input. Various stop‐
cocks enable the flow to be stopped or adjusted and the system
bled. The stopcocks are labelled on the plate.
1.
5a. Bypass fitting DLG with drain valve (depending
on the design of the measuring plate)
6. Stopcock/flow adjustment device
7. Stopcock
8. Filter
9. Potential equalisation pin
® measuring and control station with a modular
2.
2a.
3.
4.
5.
5a.
6.
A2014