Table of Contents
Advertisement
Storage and Transport
3
Storage and Transport
Ambient conditions for storage and trans‐
port
26
CAUTION!
–
Prior to storage or transport, ensure that the system
is free from feed chemical and water
–
Flush out the media carrying parts including the
hoses using clean pure water
–
Store and transport the system in its original pack‐
aging.
–
Also protect the packaged systems against damp,
exposure to chemicals and mechanical effects
–
Please also observe the operating instructions for fit‐
tings and other units, such as sensors, filters,
metering pumps ...
Storage temperature: 0 ... 55 °C
air humidity: < 95% relative air humidity, non-condensing
Humidity: None. Rain and condensation not permitted.
Other: No dust, no direct sunlight.
NOTICE!
If the system is stored as an assembly with other compo‐
nents, then the storage and transport conditions should
be appropriate for the component with the least resist‐
ance to external influences.
Advertisement
Table of Contents
Troubleshooting
