Intended Use - ProMinent DULCOTROL DWCa Assembly And Operating Instructions Manual

Safety and responsibility

2.4 Intended Use

14
The unit is only intended for measuring or controlling a meas‐
n
uring parameter in aqueous media, within the measuring range
of the sensors used and in accordance with the identity code
and specifications on the unit's nameplate.
Compare the identity code on the nameplate with the identity
n
code in the overview and the applications stated there.
The unit is not intended for measuring or regulating gaseous or
n
solid media.
Only use the unit in accordance with the technical data and
n
specifications provided in these operating instructions and in
the operating instructions for the individual components!
You are obliged to observe the information contained in the
n
operating instructions at the different phases of the device's
service life (such as assembly, installation, etc.).
Do not use the unit outdoors.
n
All other uses or a modification of the unit are only permitted
n
with the written authorisation of the manufacturer.
Only allow adequately qualified personnel to operate the unit,
n
Ä Chapter 2.5 'User qualification' on page 15 . The oper‐
see
ator of the unit is responsible for ensuring that personnel are
qualified.