Installing Sensors In The Bypass Fitting Dgma - ProMinent DULCOTROL DWCa Assembly And Operating Instructions Manual

7

Installing Sensors in the Bypass Fitting DGMa

Installing Sensors in the Bypass Fitting DGMa
User qualification, mechanical installation: trained qualified per‐
n
Ä Chapter 2.5 'User qualification' on page 15
sonnel, see
User qualification, hydraulic installation: trained qualified per‐
n
Ä Chapter 2.5 'User qualification' on page 15
sonnel, see
User qualification, electrical installation: Electrical technician,
n
Ä Chapter 2.5 'User qualification' on page 15
see
WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very serious inju‐
ries.
Please ensure when handling hazardous sub‐
stances that you have read the latest safety data
sheets provided by the manufacture of the haz‐
ardous substance. The actions required are
described in the safety data sheet. Check the
safety data sheet regularly and replace, if neces‐
sary, as the hazard potential of a substance can be
re-evaluated at any time based on new findings.
The system operator is responsible for ensuring
that these safety data sheets are available and that
they are kept up to date, as well as for producing
an associated hazard assessment for the worksta‐
tions affected.
CAUTION!
– Observe the maximum permissible operating
parameters for the entire installation (e.g. pres‐
sure, temperature, flow).
– In this respect, consider the lowest maximum
permissible operating parameters for the parts
of the DULCOTROL
and the integrated sensors; see their operating
instructions.
– Please also observe the operating instructions
for any other units, such as sensors, sample
water pumps ...
– Bear in mind the direction of flow of the sample
water.
– Do not exceed the maximum operating pres‐
sure.
– Fit an appropriate pressure reducer if unavoid‐
able.
– Danger due to pressurised media. Before
working on the hydraulic part of the
DULCOTROL
ensure in a controlled manner that this part is
at atmospheric pressure using the sampling
tap.
– Wear safety goggles.
measuring/control station
®
measuring/control station,
®
29