User interface of the controllers
11
User interface of the controllers
DACb
11.1
Operating concept
11.1.1
Display and keys
Fig. 17: Operating cross (1) / Active keys are displayed in [black] in the display; inactive keys in [grey].
Continuous display
Fig. 18: A display change is made within a sequence of actions.
I.
Continuous display 1
II. Display 2
III. Display 3
IV. Display 4
52
One or two controllers with different user interfaces can be fitted,
depending on the selection using the identity code, on the
DULCOTROL
®
faces are described here and facilitate basic tasks on the control‐
lers. All other tasks, such as configuring the inputs and outputs
etc., are described in the detailed operating instructions for the
ProMinent
components.
®
You will find the operating instructions for the ProMinent
nents on the manufacturer's homepage .
1.
The following path is shown as an example:
Continuous display ➨
[Slope] ➨
➨
[Calibrate]
The function of the keys is described in the table
'Functions of the keys ' on page 56 .
measuring and control station. These user inter‐
[Calibrate] ➨
➨
or
.
[Slope]
®
compo‐
A1035
➨
or
A1036
Ä Chapter 11.1.2