Charging Outside The Outdoor Vehicle - Otto Bock ScoutCrawler Instructions For Use Manual

Usage

7.4.5.2 Charging Outside the Outdoor Vehicle

Alternately, the battery pack can also be charged via the
charging receptacle integrated in the battery pack. Use the
supplied charging cable for external charging:
1) Turn off the control unit on the outdoor vehicle.
2) Remove the battery case cover (see Fig. 16, item 1).
3) Loosen the battery support strap (see Fig. 16, item 2).
4) Pull the release lever of the connection holder up (see
Fig. 17, item 1).
5) Loosen the connection holder by rocking it slightly and
remove it from the battery pack.
NOTICE! Do not use force to loosen the battery
pack connections.
→ The battery pack is released and can now be
removed.
6) Connect the charging cable for external charging to the
charging receptacle on the battery pack (see Fig. 19,
item 1).
NOTICE! Observe the direction of the charging
cable! The plug connection has to face left.
7) Connect the charging cable for external charging to the
charging plug of the battery charging cable (see
Fig. 18, item 2).
8) Connect the battery charger to the mains plug and turn
it on.
34 | Ottobock
→ The charging process starts automatically, and the
battery charge condition is indicated by the LED
indicator on the battery charger.
9) Turn the battery charger off when the charging process
is complete.
10) Disconnect the battery charger from the mains supply.
11) Disconnect the charging cable for external charging
from the battery pack.
→ The battery pack is fully charged.
12) Reinstall the battery pack in the battery case on the out­
door vehicle.
13) Mount the connection holder on the battery pack.
14) Secure the battery pack with the support strap.
15) Close the cover of the battery case.
16) Switch on the control unit of the outdoor vehicle.
→ The outdoor vehicle is ready for operation.
ScoutCrawler