Table of Contents
Advertisement
Usage
Fig. 14
LCD display with all symbols
1 Direction indicator, left
– No function –
2 Battery capacity
3 Power backrest
– No function –
4 Electric seat tilt
– No function –
5 Control Panel
6 Drive-Away Lock
7 Speed level
8 Open-end wrench
22 | Ottobock
9 Excess temperature
10 Direction indicator, right
– No function –
11 Drive wheel brake
12 Warning
13 Creep speed
14 Power module
15 Drive motor
16 Light
– No function –
Selected speed level (LCD display)
After turning the control panel on, the LCD display indicates
the selected speed level and battery capacity in the Driving
menu:
Display
Information
Right: Selected speed level = 1
Left: Battery capacity
Battery Capacity (LCD Display)
The "Battery Capacity" LCD display (see Fig. 14, item 2) is
divided into 7 segments and displays the current battery
capacity:
•
Immediately after powering up the outdoor vehicle, the
battery indicator shows the battery capacity that was
saved before it was last switched off.
•
After brief operation, the battery indicator shows the
exact battery status.
•
A charge of 100% corresponds to 7 segments on the
battery symbol.
•
As the remaining battery capacity decreases, the LCD
segments turn off one by one.
•
If only 1 blinking segment is shown on the LCD display,
then the battery is in a low voltage state. Since further
use results in battery damage, the warning signal is also
shown on the LCD display. The battery must be
charged immediately.
ScoutCrawler
Advertisement
Table of Contents
