Otto Bock ScoutCrawler Instructions For Use Manual page 16

Preparation for Use
Fig. 4 Adjusting the Armrest Height
Fig. 5 Adjusting the armrest position/control panel
16 | Ottobock
6.3.4 Adjusting the Control Panel
The control panel position can be adjusted. This is done
using three Allen head screws (Allen key, size 3). Follow the
adjustment instructions below:
1) Loosen the three Allen head screws on the bottom of the
armrest (see Fig. 5).
2) Move the control panel to the corresponding position.
3) Firmly retighten the three Allen head screws.
→ Adjusting the control panel position is complete.
6.3.5 Changing Control Unit Parameters
WARNING
Incorrect configuration settings
Falling, tipping over, collision due to programming errors
► Programming may only be performed by qualified per­
sonnel trained by the manufacturer. The manufacturer
of the product and the control unit manufacturer are
not liable in case of damage caused by programming
which was not performed properly and/or which was
not adjusted properly according to the user's abilities.
► Note that modified parameter settings in the configura­
tion can lead to changes in driving characteristics. In
particular, changes to the speed, acceleration, braking
or joystick settings can lead to unexpected and there­
fore uncontrollable driving characteristics and cause
an accident.
ScoutCrawler