Otto Bock ScoutCrawler Instructions For Use Manual page 15

Fig. 2 Adjusting the tyre stops
Fig. 3 Position of the tyre stops
ScoutCrawler
6.3.3 Adjusting the Armrests
The height and position of the armrests can be adjusted.
They are adjusted using Allen head screws (Allen key,
size 3, Allen key, size 5). Follow the instructions below to
make the adjustments:
Adjusting the Armrest Height
1) Loosen the Allen head screw (Allen key, size 5) on the
reverse side of the armrest (see Fig. 4).
2) Move the armrest to the corresponding height.
3) Firmly retighten the Allen head screw.
→ Adjusting the armrest height is complete.
Adjusting the Armrest Position
1) Loosen the three Allen head screws (Allen key, size 3)
on the bottom of the armrest (see Fig. 5).
2) Move the armrest to the corresponding position.
3) Firmly retighten the three Allen head screws.
→ Adjusting the armrest position is complete.
2 cm
Preparation for Use
Ottobock | 15