Poe Module Installation (Optional); Figure 3-11: Poe Module - Cable Connection; I Nstallation (O Ptional ) - IEI Technology AFL3-W10A-AL User Manual

3.7 PoE Module Installation (Optional)

A PoE module (32 V ~ 57 V input, 12 V output) must be installed and connected before
start using the panel PC as a PoE powered device (PD). To install the optional PoE
module, follow the steps below.
NOTE:
Installing the PoE module in the 12.1" and 15.6" models will occupy the
space for 2.5" HDD installation. Use an M.2 SSD module (B-key 2242)
as the storage device when PoE module installation is required.
Step 1: Remove the plastic back cover. See Section 3.4 above.
Step 2:
Connect the two cables came with the PoE module to the corresponding
connectors on the module.
Figure 3-11: PoE Module – Cable Connection
Page 28
AFL3-W10A/12A/W15A-AL Panel PC