Figure 3-37: Drill Pilot Holes For V-Stand; Figure 3-38: Secure V-Stand To System - IEI Technology AFL3-W10A-AL User Manual
Flat bezel panel pc with intel celeron j3455 quad-core cpu, touchscreen, dual usb 3.1 gen 1, dual gbe lan, serial ports, hdmi, hd audio, wi-fi, bluetooth, optional poe and rohs
Table of Contents
Advertisement
AFL3-W10A/12A/W15A-AL Panel PC
Figure 3-37: Drill Pilot Holes for V-Stand
Step 2:
Align the screw holes on the V-Stand with the VESA mount screw holes on the
system rear panel.
Step 3:
Insert the four VESA mount screws into the four screw holes on the system rear
panel. Adjust the V-Stand to a proper position.
Step 4:
Tighten until the screw shank is secured against the rear panel.
Figure 3-38: Secure V-Stand to System
Page 51
Advertisement
Chapters
Table of Contents
