IEI Technology AFL3-W07A-AL User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Touch Panel
  5. AFL3-W07A-AL
  6. User manual

IEI Technology AFL3-W07A-AL User Manual

7" flat bezel panel pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AFL3-W07A-AL Panel PC
MODEL:
AFL3-W07A-AL
7" Flat Bezel Panel PC with Intel® Celeron® N3350 CPU,
Touchscreen, Dual USB 3.1 Gen 1, M.2 B-Key Slot,
Dual GbE LAN, PoE PD, Wi-Fi 802.11a/b/g/n/ac and RoHS
Rev. 1.00 - September 11, 2019
User Manual
User Manual
Page I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AFL3-W07A-AL and is the answer not in the manual?

Questions and answers

Related Manuals for IEI Technology AFL3-W07A-AL

Summary of Contents for IEI Technology AFL3-W07A-AL

  • Page 1 AFL3-W07A-AL Panel PC MODEL: AFL3-W07A-AL 7" Flat Bezel Panel PC with Intel® Celeron® N3350 CPU, Touchscreen, Dual USB 3.1 Gen 1, M.2 B-Key Slot, Dual GbE LAN, PoE PD, Wi-Fi 802.11a/b/g/n/ac and RoHS User Manual User Manual Page I Rev. 1.00 - September 11, 2019...
  • Page 2 AFL3-W07A-AL Panel PC Revision Date Version Changes September 11, 2019 1.00 Initial release Page II...
  • Page 3 AFL3-W07A-AL Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 AFL3-W07A-AL Panel PC Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.

  • Page 5: Table Of Contents

    AFL3-W07A-AL Panel PC Table of Contents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 F ........................2 EATURES 1.3 F ......................3 RONT ANEL 1.4 B ......................4 OTTOM ANEL 1.5 R ....................... 5 ANEL 1.6 S .................... 5...
  • Page 6 AFL3-W07A-AL Panel PC 3.9 C CMOS ......................35 LEAR 3.10 S ..................36 OFTWARE NSTALLATION 3.10.1 Driver Download ................... 37 4 BIOS SETUP ........................ 39 4.1 I ......................40 NTRODUCTION 4.1.1 Starting Setup ....................40 4.1.2 Using Setup ...................... 40 4.1.3 Getting Help .....................
  • Page 7 AFL3-W07A-AL Panel PC 5.2 A ..................68 STATIC RECAUTIONS 5.3 T ....................69 URN OFF THE OWER 5.4 R .................. 69 EMOVING THE OVER 5.5 WLAN C .................. 70 EPLACEMENT 5.6 R ..................71 EINSTALLING THE OVER 6 INTERFACE CONNECTORS ................... 72 6.1 P...
  • Page 8 AFL3-W07A-AL Panel PC B.2.2 Cleaning Tools ....................92 C BIOS MENU OPTIONS ..................... 93 D WATCHDOG TIMER ....................96 E HAZARDOUS MATERIALS DISCLOSURE ............99 E.1 H IPB P AZARDOUS ATERIAL ISCLOSURE ABLE FOR RODUCTS ERTIFIED AS HS C 2002/95/EC W ........
  • Page 9 AFL3-W07A-AL Panel PC List of Figures Figure 1-1: AFL3-W07A-AL Flat Bezel Panel PC ................. 2 Figure 1-2: Front View ........................3 Figure 1-3: Bottom Panel ....................... 4 Figure 1-4: Rear View ........................5 Figure 1-5: AFL3-W07A-AL Dimensions (mm) ................8 Figure 3-1: Back Cover Retention Screws .................
  • Page 10 AFL3-W07A-AL Panel PC Figure 5-2: WLAN Card Location ....................71 Figure 6-1: Main Board Layout Diagram (Front Side) ............... 73 Figure 6-2: Main Board Layout Diagram (Solder Side) ............. 73 Page X...
  • Page 11 AFL3-W07A-AL Panel PC List of Tables Table 1-1: System Specifications ....................7 Table 6-1: BIOS Navigation Keys ....................41 Table 6-1: Peripheral Interface Connectors ................74 Table 6-2: Battery Connector (BT1) Pinouts ................74 Table 6-3: Debug Port Connector (80PORT1) Pinouts .............. 75 Table 6-4: Internal HDMI Connector (HDMI1) Pinouts ...............
  • Page 12 AFL3-W07A-AL Panel PC List of BIOS Menus BIOS Menu 1: Main ........................42 BIOS Menu 2: Advanced ......................43 BIOS Menu 3: ACPI Settings ....................... 44 BIOS Menu 4: iWDD H/W Monitor ....................45 BIOS Menu 5: USB Configuration ....................46 BIOS Menu 6: CPU Configuration ....................

  • Page 13: Introduction

    AFL3-W07A-AL Panel PC Chapter Introduction Page 1...

  • Page 14: Overview

    1.1 Overview Figure 1-1: AFL3-W07A-AL Flat Bezel Panel PC The AFL3-W07A-AL is a dual-core Intel® Celeron® processor N3350 powered flat bezel panel PC with a rich variety of functions and peripherals. The compact design is ideal for easy and simplified integration into kiosk and point-of-sales (POS) applications.

  • Page 15: Front Panel

    AFL3-W07A-AL Panel PC 1.3 Front Panel The front side of the AFL3-W07A-AL is a flat-bezel panel with a 7" TFT LCD screen surrounded by a PC/ABS plastic frame (Figure 1-2). Figure 1-2: Front View There is a power LED indicator located on the front panel. The status descriptions of the power LED indicator are listed below.

  • Page 16: Bottom Panel

    1 x Power button  1 x Reset button  1 x Clear CMOS button  Figure 1-3: Bottom Panel WARNING: When using PoE to power the AFL3-W07A-AL, the total power of the four USB ports must not exceed 5 watts. Page 4...

  • Page 17: Rear Panel

    The rear panel provides access to retention screw holes that support VESA mounting. See Figure 1-5. Figure 1-4: Rear View 1.6 System Specifications The technical specifications for the AFL3-W07A-AL systems are listed in Table 1-4. Specification AFL3-W07A-AL LCD Size 7" (16:9) Max.
  • Page 18 AFL3-W07A-AL Panel PC CPU (SoC) Intel® Celeron® processor N3350 (up to 2.4 GHz, 2M cache, dual-core, TDP 6 W) Ethernet ® Two Intel I211 PCIe GbE controllers Memory One 204-pin 1866 MHz DDR3L SO-DIMM slot preinstalled with 4 GB SDRAM (system max. 8 GB) Storage One M.2 B+M key 2242 card slot (USB/SATA signal) for SSD...

  • Page 19: Table 1-1: System Specifications

    AFL3-W07A-AL Panel PC Power Consumption 12 V @ 2.17 A PoE (PD) Supported by on-board PoE chip 51-57V DC, 0.5A max. (for IEEE802.3at) Safety/EMC CE, FCC class A ErP 2009/125/EC I/O Ports and Switches 2 x GbE LAN (RJ-45, one supports PoE) 2 x USB 3.1 Gen 1 (5Gb/s) connectors...

  • Page 20: Dimensions

    AFL3-W07A-AL Panel PC 1.7 Dimensions The AFL3-W07A-AL dimensions are shown below. Width: 190.9 mm  Height: 127.3 mm  Depth: 43.4 mm  Figure 1-5: AFL3-W07A-AL Dimensions (mm) Page 8...

  • Page 21: Unpacking

    AFL3-W07A-AL Panel PC Chapter Unpacking Page 9...

  • Page 22: Npacking

    AFL3-W07A-AL Panel PC 2.1 Unpacking To unpack the flat bezel panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the flat bezel panel PC has been properly installed.

  • Page 23: Packing List

    AFL3-W07A-AL Panel PC 2.2 Packing List The AFL3-W07A-AL flat bezel panel PC is shipped with the following components: Quantity Item Image AFL3-W07A-AL panel PC Power adapter (36 W) Power cord Screws for VESA mounting Thermal pad for M.2 SSD module 2.3 Optional Items...
  • Page 24 AFL3-W07A-AL Panel PC Item and Part Number Image Panel mounting kit (P/N: AFL3PK-W07A-R11) Rack mount kit (P/N: AFL3RK-W07A-R11) (P/N: ARM-11-RS) (P/N: ARM-31-RS) Stand for VESA 75 (P/N: STAND-B08) Stand (P/N:STAND-100-RS) LCD monitor stand with adjustable hinge (P/N: VSTAND-A07-R11) If any of these items are missing or damaged, contact the distributor or sales representative immediately.

  • Page 25: Installation

    AFL3-W07A-AL Panel PC Chapter Installation Page 13...

  • Page 26: Anti-Static Precautions

    AFL3-W07A-AL and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL3-W07A-AL. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the AFL3-W07A-AL is accessed internally, or any other...

  • Page 27: Installation And Configuration Steps

    Over-tightening back cover screws will crack the plastic frame. Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm). To install an M.2 SSD into the AFL3-W07A-AL, please follow the steps below: Step 1: Remove two (2) retention screws from the back cover (Figure 3-1).

  • Page 28: Figure 3-1: Back Cover Retention Screws

    AFL3-W07A-AL Panel PC Figure 3-1: Back Cover Retention Screws Step 2: Remove the back cover from the device. See Figure 3-2. Figure 3-2: Open the Back Cover Step 3: Locate the M.2 B-key 2242 slot. Remove the preinstalled retention screw on the screw pillar of the M.2 slot as shown in Figure 3-3.

  • Page 29: Figure 3-3: M.2 Slot Location

    AFL3-W07A-AL Panel PC Figure 3-3: M.2 Slot Location Step 4: Line up the notch on the M.2 SSD with the notch on the connector. Slide the M.2 SSD into the socket at an angle of about 20º (Figure 3-4). Step 5: Secure the M.2 SSD with the retention screw.

  • Page 30: At/Atx Mode Selection

    AFL3-W07A-AL Panel PC 3.5 AT/ATX Mode Selection AT or ATX power mode can be used on the AFL3-W07A-AL. The selection is made through an AT/ATX switch located on the bottom panel (Figure 3-5). Figure 3-5: AT/ATX Switch Location 3.5.1 AT Power Mode With the AT mode selected, the power is controlled by a central power unit rather than a power switch.

  • Page 31: Mounting The System

    AFL3-W07A-AL Panel PC 3.6 Mounting the System The methods of mounting the AFL3-W07A-AL are listed below. Wall mounting  Panel mounting  Rack mounting  Arm mounting  Stand mounting  V-Stand mounting  The mounting methods are described below.

  • Page 32: Figure 3-6: Wall-Mounting Bracket

    AFL3-W07A-AL Panel PC Figure 3-6: Wall-mounting Bracket Step 6: Insert the four monitor mounting screws provided in the wall mount kit into the four screw holes on the real panel of the flat bezel panel PC and tighten until the screw shank is secured against the rear panel (Figure 3-7).

  • Page 33: Figure 3-7: Chassis Support Screws

    AFL3-W07A-AL Panel PC Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on the bracket. Step 8: Carefully insert the screws through the holes and gently pull the monitor downwards until the monitor rests securely in the slotted holes (Figure 3-7).

  • Page 34: Panel Mounting

    AFL3-W07A-AL Panel PC Figure 3-8: Secure the Panel PC 3.6.2 Panel Mounting To mount the AFL3-W07A-AL flat bezel panel PC into a panel, please follow the steps below. Step 1: Select the position on the panel to mount the flat bezel panel PC.

  • Page 35: Figure 3-10: Panel Mounting Kit Installation

    AFL3-W07A-AL Panel PC Step 3: Slide the flat bezel panel PC through the hole until the frame is flush against the panel. Step 4: Insert a M5*50 screw into the screw hole on the side of the panel mounting bracket. Then, install the following components onto the screw in sequence.

  • Page 36: Figure 3-11: Securing Panel Mounting Brackets

    AFL3-W07A-AL Panel PC Step 6: Align the panel mounting bracket screw holes with the VESA mounting holes on the rear of the panel PC. Step 7: Secure the two panel mounting brackets to the rear of the panel PC by inserting...

  • Page 37: Cabinet And Rack Installation

    AFL3-W07A-AL Panel PC 3.6.3 Cabinet and Rack Installation The AFL3-W07A-AL flat bezel panel PC can be installed into a cabinet or rack. The installation procedures are similar to the panel mounting installation. To do this, please follow the steps below:...

  • Page 38: Figure 3-13: Rack Mounting Kit Installation

    AFL3-W07A-AL Panel PC Tighten a nut until the spring is compressed enough for plastic cap. Plastic Tighten a plastic cap onto the end of screw thread. Step 3: Repeat Step 4 to install the other three screws into the sides of the two rack mounting brackets.

  • Page 39: Figure 3-14: Securing Rack Mounting Brackets

    AFL3-W07A-AL Panel PC NOTE: The rack mounting kit described in this section is an optional item. To purchase it, please contact an IEI sales representative. Figure 3-14: Securing Rack Mounting Brackets Step 6: Slide the panel PC with the attached rack/cabinet bracket into a rack or cabinet (Figure 3-15).

  • Page 40: Arm Mounting

    (Figure 3-15). 3.6.4 Arm Mounting The AFL3-W07A-AL is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 75 mm interface pad. To mount the AFL3-W07A-AL on an arm, please follow the steps below. Step 1: The arm is a separately purchased item.

  • Page 41: Figure 3-16: Arm Mounting Retention Screw Holes

    When purchasing the arm please ensure that it is VESA compliant and that the arm has a 75 mm interface pad. If the mounting arm is not VESA compliant it cannot be used to support the AFL3-W07A-AL flat bezel panel Step 2: Once the mounting arm has been firmly attached to the surface, lift the flat bezel panel PC onto the interface pad of the mounting arm.

  • Page 42: Stand Mounting

    AFL3-W07A-AL Panel PC Figure 3-17: Arm Mounting 3.6.5 Stand Mounting To mount the AFL3-W07A-AL using the stand mounting kit, please follow the steps below. Step 1: Locate the screw holes on the rear of the AFL3-W07A-AL. This is where the bracket will be attached.

  • Page 43: V-Stand Mounting

    AFL3-W07A-AL Panel PC Figure 3-18: Stand Mounting (Stand-A/Bxx) 3.6.6 V-Stand Mounting To mount the AFL3-W07A-AL using the V-Stand mounting kit, please follow the steps below. Step 1: Carefully mark the locations of the four V-Stand screw holes on the mounting area.

  • Page 44: Figure 3-19: Drill Pilot Holes For V-Stand

    AFL3-W07A-AL Panel PC Figure 3-19: Drill Pilot Holes for V-Stand Step 2: Align the screw holes on the V-Stand with the VESA mount screw holes on the system rear panel. Step 3: Insert the four VESA mount screws into the four screw holes on the system rear panel.

  • Page 45: Powering On The System

    Connect the power cord to the power adapter. Connect the other end of the power cord to a power source. Step 2: Connect the power adapter to the power connector of the AFL3-W07A-AL. Step 3: Locate the power button on the I/O panel.

  • Page 46: Figure 3-22: Powering On The System

    AFL3-W07A-AL Panel PC Figure 3-22: Powering On the System NOTE: When both DC-in and PoE are connected to the device, the DC-in will be used as the main power source. Disconnecting DC-in while the system is running may lead to system shutdown or reboot.

  • Page 47: Reset The System

    Figure 3-23: Reset Button Location 3.9 Clear CMOS If the AFL3-W07A-AL fails to boot due to improper BIOS settings, the clear CMOS button clears the CMOS data and resets the system BIOS information. To do this, push the clear CMOS button for three seconds, then restart the system. The clear CMOS button location is shown in Figure 3-24.

  • Page 48: Software Installation

    AFL3-W07A-AL Panel PC 3.10 Software Installation All the drivers for the AFL3-W07A-AL are available on IEI Resource Download Center (https://download.ieiworld.com). Type AFL3-W07A-AL and press Enter to find all the relevant software, utilities, and documentation. Figure 3-25: IEI Resource Download Center...

  • Page 49: Driver Download

    3.10.1 Driver Download To download drivers from IEI Resource Download Center, follow the steps below. Step 1: Go to https://download.ieiworld.com. Type AFL3-W07A-AL and press Enter. Step 2: All product-related software, utilities, and documentation will be listed. You can choose Driver to filter the result.
  • Page 50 AFL3-W07A-AL Panel PC Page 38...

  • Page 51: Bios Setup

    AFL3-W07A-AL Panel PC Chapter BIOS Setup Page 39...

  • Page 52: Introduction

    AFL3-W07A-AL Panel PC 4.1 Introduction A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed.

  • Page 53: Getting Help

    AFL3-W07A-AL Panel PC Left arrow Move to the item on the left hand side Right arrow Move to the item on the right hand side Increase the numeric value or make changes Decrease the numeric value or make changes F1 key...

  • Page 54: Main

    AFL3-W07A-AL Panel PC Save & Exit – Selects exit options and loads default settings  The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above. 4.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered.

  • Page 55: Advanced

    AFL3-W07A-AL Panel PC System Date [xx/xx/xx]  Use the System Date option to set the system date. Manually enter the day, month and year. System Time [xx:xx:xx]  Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.

  • Page 56: Acpi Settings

    AFL3-W07A-AL Panel PC 4.3.1 ACPI Settings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced ACPI Settings Select the highest ACPI sleep state the system...

  • Page 57: Iwdd H/W Monitor

    AFL3-W07A-AL Panel PC 4.3.2 iWDD H/W Monitor The iWDD H/W Monitor menu (BIOS Menu 4) shows the operating temperatures and voltages. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced PC Health Status System temperature :+29 °C CPU_CORE :+0.762 V...

  • Page 58: Usb Configuration

    AFL3-W07A-AL Panel PC 4.3.3 USB Configuration Use the USB Configuration menu (BIOS Menu 5) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.

  • Page 59: Cpu Configuration

    AFL3-W07A-AL Panel PC  Disabled Legacy USB support disabled  Auto Legacy USB support disabled if no USB devices are connected 4.3.4 CPU Configuration Use the CPU Configuration (BIOS Menu 6) to view detailed CPU specifications and configure the CPU.

  • Page 60: C-States [Disabled]

    AFL3-W07A-AL Panel PC C-States [Disabled]  Use the C-States option to enable or disable the C-states.  Disabled Disables the C-state EFAULT  Enabled Enables the C-state Intel Virtualization Technology [Disabled]  Use the Intel Virtualization Technology option to enable or disable virtualization on the ®...

  • Page 61: Rtc Wake Settings

    AFL3-W07A-AL Panel PC 4.3.5 RTC Wake Settings The RTC Wake Settings menu (BIOS Menu 7) configures RTC wake event. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event.

  • Page 62: Power Saving Configuration

    AFL3-W07A-AL Panel PC 4.3.6 Power Saving Configuration Use the Power Saving Configuration menu (BIOS Menu 8) to configure system to reduce power consumption in system off state. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced Power Saving Configuration...

  • Page 63: Iei Feature

    AFL3-W07A-AL Panel PC 4.3.7 iEi Feature Use the iEi Feature menu (BIOS Menu 9) to configure One Key Recovery function. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function Reboot and recover Auto Recovery Function...

  • Page 64: Chipset

    AFL3-W07A-AL Panel PC 4.4 Chipset Use the Chipset menu (BIOS Menu 10) to access the North Bridge, South Bridge, and Integrated Graphics configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.

  • Page 65: North Bridge Configuration

    AFL3-W07A-AL Panel PC 4.4.1 North Bridge Configuration Use the North Bridge menu (BIOS Menu 11) to configure the north bridge chipset. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset > Intel IGD Configuration Intel IGD Configuration > LCD Control...

  • Page 66: Primary Display [Igd]

    AFL3-W07A-AL Panel PC Primary Display [IGD]  Use the Primary Display option to select the graphics controller used as the primary boot device. Configuration option is listed below:  EFAULT DVMT Pre-Allocated [256MB]  Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots.

  • Page 67: Lcd Control

    AFL3-W07A-AL Panel PC 4.4.1.2 LCD Control Use the LCD Control submenu (BIOS Menu 13) to select a display device which will be activated during POST. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset LCD Control Select the Video Device...

  • Page 68: South Bridge Configuration

    AFL3-W07A-AL Panel PC Backlight Control Mode [LED]  Use the Backlight Control Mode option to specify the backlight control mode. Configuration option is listed below.  EFAULT Backlight Control Type [PWM]  Use the Backlight Control Type option to specify the backlight control type.

  • Page 69: Restore On Ac Power Loss [Last State]

    AFL3-W07A-AL Panel PC Restore on AC Power Loss [Last State]  Use the Restore on AC Power Loss BIOS option to specify what state the system returns to if there is a sudden loss of power to the system. ...

  • Page 70: Hd-Audio Configuration

    AFL3-W07A-AL Panel PC 4.4.2.1 HD-Audio Configuration Use the HD-Audio Configuration menu (BIOS Menu 15) to configure the HD Audio. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset HD-Audio Configuration Enable/Disable HD-Audio HD-Audio Support [Enable] Support --------------------- : Select Screen ↑...

  • Page 71: Pci Express Configuration

    AFL3-W07A-AL Panel PC 4.4.2.2 PCI Express Configuration Use the PCI Express Configuration menu (BIOS Menu 16) to configure the PCI Express. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset PCI Express Configuration Compliance Mode > M2_AKEY1 Enable/Disable --------------------- : Select Screen...

  • Page 72: M2_Akey1

    AFL3-W07A-AL Panel PC 4.4.2.2.1 M2_AKEY1 Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset PCIe Speed [Auto] Select PCI Express port speed. --------------------- : Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. General Help Previous Values Optimized Defaults Save &...

  • Page 73: Sata Configuration

    AFL3-W07A-AL Panel PC 4.4.2.3 SATA Configuration Use the SATA Configuration menu (BIOS Menu 18) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset SATA Configuration...

  • Page 74: Security

    AFL3-W07A-AL Panel PC 4.5 Security Use the Security menu (BIOS Menu 19) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Password Description Set Administrator Password If ONLY the Administrator’s password is set,...

  • Page 75: Boot

    AFL3-W07A-AL Panel PC 4.6 Boot Use the Boot menu (BIOS Menu 20) to configure system boot options. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard...

  • Page 76: Quiet Boot [Enabled]

    AFL3-W07A-AL Panel PC Quiet Boot [Enabled]  Use the Quiet Boot BIOS option to select the screen display when the system boots.  Disabled Normal POST messages displayed  Enabled OEM Logo displayed instead of POST messages EFAULT Launch PXE OpROM [Disabled] ...

  • Page 77: Save & Exit

    AFL3-W07A-AL Panel PC 4.7 Save & Exit Use the Save & Exit menu (BIOS Menu 21) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Main...
  • Page 78 AFL3-W07A-AL Panel PC Save as User Defaults  Use the Save as User Defaults option to save the changes done so far as user defaults. Restore User Defaults  Use the Restore User Defaults option to restore the user defaults to all the setup options.

  • Page 79: System Maintenance

    AFL3-W07A-AL Panel PC Chapter System Maintenance Page 67...

  • Page 80: System Maintenance Introduction

    AFL3-W07A-AL Panel PC 5.1 System Maintenance Introduction If the components of the AFL3-W07A-AL fail they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts. Back cover removal instructions for the AFL3-W07A-AL are described below.

  • Page 81: Turn Off The Power

    Over-tightening back cover screws will crack the plastic frame. Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm). To access the AFL3-W07A-AL internally the back cover must be removed. To remove the back cover, please follow the steps below.

  • Page 82: Wlan Card Replacement

    Carefully separate the back cover from the chassis and lift the cover of the device Step 0: 5.5 WLAN Card Replacement The AFL3-W07A-AL has one WLAN card slot. To replace the WLAN card, follow the instructions below. Step 1: Follow all anti-static procedures. See Section 5.2.

  • Page 83: Reinstalling The Cover

    AFL3-W07A-AL Panel PC Figure 5-2: WLAN Card Location Step 5: Disconnect the antenna cables on the WLAN module and remove the retention screw to release the WLAN card. Step 6: Grasp the WLAN card by the edges and carefully pull it out of the socket.

  • Page 84: Interface Connectors

    AFL3-W07A-AL Panel PC Chapter Interface Connectors Page 72...

  • Page 85: Peripheral Interface Connectors

    AFL3-W07A-AL Panel PC 6.1 Peripheral Interface Connectors The AFL3-W07A-AL panel PC motherboard comes with a number of peripheral interface connectors and configuration jumpers. The connector locations are shown in Figure 6-1. The Pin 1 locations of the on-board connectors are also indicated in the diagram below.

  • Page 86: Internal Peripheral Connectors

    AFL3-W07A-AL Panel PC 6.2 Internal Peripheral Connectors Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. The table below shows a list of the peripheral interface connectors on the motherboard. Pinouts of these connectors can be found in the following sections.

  • Page 87: Debug Port Connector (80Port1)

    AFL3-W07A-AL Panel PC 6.2.2 Debug Port Connector (80PORT1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION +5V(Reserved) LPC_AD1 +3.3V LPC_AD0 LPC_FRAME_N LPC_SERIRQ PLT_RST# LPC_AD3 LPC_CLOCK LPC_AD2 Table 6-3: Debug Port Connector (80PORT1) Pinouts 6.2.3 Internal HDMI Connector (HDMI1) PIN NO. DESCRIPTION PIN NO.

  • Page 88: Lvds Connector (Lvds2)

    AFL3-W07A-AL Panel PC 6.2.4 LVDS Connector (LVDS2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC_LCD_COM LVDSA3+ +VCC_LCD2 +VCC_LCD2 LCD_RST_IN_3V3 LCD_STBY_IN_3V3- LCD_DIMO LVDSA0- LCD_SELB LVDSA0+ VCC_LCD_AVDD LVDSA1- VLED- LVDSA1+ VLED- LCD_LR LVDSA2- LCD_UD LVDSA2+ LCD_VGL LCD_CABC_EN1 LVDSACLK- LCD_CABC_EN0 LVDSACLK+ LCD_VGH VLED+ LVDSA3-...

  • Page 89: Table 6-6: M.2 A-Key Slot (M2_Akey1) Pinouts

    AFL3-W07A-AL Panel PC Module Key Module Key Module Key PCIE_TX+ PCIE_TX- PCIE_RX+ PCIE_RX- CLK_PCIE+ CLK_PCIE- BUF_PLT_RST# PCIE_CLKREQ# Pull Up +V3.3A PCIE_WAKE# Pull Up +V3.3A +V3.3A +V3.3A Table 6-6: M.2 A-Key Slot (M2_AKEY1) Pinouts Page 77...

  • Page 90: B-Key Slot (M2_1)

    AFL3-W07A-AL Panel PC 6.2.6 M.2 B-Key Slot (M2_1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC3 VCC3 USB_+DATA6 USB_-DATA6 USB3_RX2_N USB3_RX2_P USB3P0_TXDNM2 USB3P0_TXDPM2 M1_SATA_RX1+_C M1_SATA_RX1-_C M1_SATA_TX1-_C M1_SATA_TX1+_C Reset Page 78...

  • Page 91: Power Led Connector (Pw_Led1)

    AFL3-W07A-AL Panel PC VCC3 VCC3 VCC3 Table 6-7: M.2 B-Key Slot (M2_1) Pinouts 6.2.7 Power LED Connector (PW_LED1) PIN NO. DESCRIPTION +5VS +5VA Table 6-8: Power LED Connector (PW_LED1) Pinouts 6.2.8 Speaker Connector, Left (SPK_L1) PIN NO. DESCRIPTION SPK_OUT_L+ SPK_OUT_L- Table 6-9: Left Speaker Connector (SPK_L1) Pinouts 6.2.9 SPI Flash Connector (J_SPI1)

  • Page 92: Spi Flash Connector, Ec (J_Spi2)

    AFL3-W07A-AL Panel PC 6.2.10 SPI Flash Connector, EC (J_SPI2) PIN NO. DESCRIPTION +3.3V SPI_CS SPI_SO_SW SPI_CLK_SW SPI_SI_SW Table 6-11: EC SPI Flash Connector (J_SPI2) Pinouts 6.2.11 USB 2.0 Connector (TOUCH_USB1) PIN NO. DESCRIPTION USB_DATA- USB_DATA+ Table 6-12: USB 2.0 Connector (TOUCH_USB1) Pinouts 6.2.12 USB 2.0 Connector (RFID_USB)

  • Page 93: External Interface Panel Connectors

    AFL3-W07A-AL Panel PC 6.3 External Interface Panel Connectors The table below lists the rear panel connectors on the AFL2MB-15A motherboard. Pinouts of these connectors can be found in the following sections. Connector Type Label Ethernet connector RJ-45 LAN1 Ethernet connector...

  • Page 94: Power Connector (Pwr1)

    AFL3-W07A-AL Panel PC 6.3.2 Power Connector (PWR1) Table 6-17: Power Connector (PWR1) Pinouts 6.3.3 USB 2.0 Connectors (USB20_CN2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION POWER Power DATA0- DATA1- DATA0+ DATA1+ Table 6-18: USB 2.0 Connectors (USB20_CN2) Pinouts 6.3.4 USB 3.1 Gen 1 Connectors (USB3-1) PIN NO.

  • Page 95: A Regulatory Compliance

    AFL3-W07A-AL Panel PC Appendix Regulatory Compliance Page 83...
  • Page 96 AFL3-W07A-AL Panel PC DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive 2014/30/EU  Low-Voltage Directive 2014/35/EU  RoHS II Directive 2015/863/EU  If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 97 AFL3-W07A-AL Panel PC Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ...
  • Page 98 AFL3-W07A-AL Panel PC Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 1999/5/CE. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
  • Page 99 AFL3-W07A-AL Panel PC FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and  This device must accept any interference received, including interference ...

  • Page 100: B Safety Precautions

    AFL3-W07A-AL Panel PC Appendix Safety Precautions Page 88...

  • Page 101: Safety Precautions

    Do not apply voltage levels that exceed the specified voltage range.  Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the AFL3-W07A-AL chassis is opened when  the AFL3-W07A-AL is running. Do not drop or insert any objects into the ventilation openings of the ...

  • Page 102: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL3-W07A-AL. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the AFL3-W07A-AL is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

  • Page 103: Product Disposal

    Please follow the national guidelines for electrical and electronic product disposal. B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the AFL3-W07A-AL, please follow the guidelines below. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the AFL3-W07A-AL, please read the details below. Page 91...

  • Page 104: Cleaning Tools

    In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the AFL3-W07A-AL. Cloth – Although paper towels or tissues can be used, a soft, clean piece of ...

  • Page 105: Cbios Menu Options

    AFL3-W07A-AL Panel PC Appendix BIOS Menu Options Page 93...
  • Page 106 AFL3-W07A-AL Panel PC System Date [xx/xx/xx] ......................43 System Time [xx:xx:xx] ....................... 43 ACPI Sleep State [S3 (Suspend to RAM)] ................44 Hardware Health Status ....................... 45 USB Devices ......................... 46 Legacy USB Support [Enabled] ..................46 EIST [Enabled] ........................47 C-States [Disabled] ......................
  • Page 107 AFL3-W07A-AL Panel PC Save as User Defaults ......................66 Restore User Defaults ......................66 Page 95...

  • Page 108: D Watchdog Timer

    AFL3-W07A-AL Panel PC Appendix Watchdog Timer Page 96...
  • Page 109 AFL3-W07A-AL Panel PC NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working. The system may stop working because of external EMI or software bugs.
  • Page 110 AFL3-W07A-AL Panel PC NOTE: The Watchdog Timer is activated through software. The software application that activates the Watchdog Timer must also deactivate it when closed. If the Watchdog Timer is not deactivated, the system will automatically restart after the Timer has finished its countdown.

  • Page 111: E Hazardous Materials Disclosure

    AFL3-W07A-AL Panel PC Appendix Hazardous Materials Disclosure Page 99...

  • Page 112: Hazardous Material Disclosure Table For Ipb Products Certified As Rohs Compliant Under 2002/95/Ec Without Mercury

    AFL3-W07A-AL Panel PC E.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
  • Page 113 AFL3-W07A-AL Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply...
  • Page 114 AFL3-W07A-AL Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。...

This manual is also suitable for:

Afl3-w07a-al-n1/p/pc/4g-r10Afl3-w07a-al2

Table of Contents