IEI Technology AFL3-W07A-BT-N1 User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Touch Panel
  5. AFL3-W07A-BT-N1
  6. User manual

IEI Technology AFL3-W07A-BT-N1 User Manual

Flat bezel panel pc with intel celeron n2807 dual-core cpu, touchscreen, dual usb 3.0, dual gbe lan, dual rs-232, hd audio, wi-fi 802.11 a/b/g/n/ac, ip 65 rating and rohs
Hide thumbs Also See for AFL3-W07A-BT-N1:
Table of Contents

Advertisement

Quick Links

Download this manual
AFL3-W07A-BT-N1 Panel PC
MODEL:
AFL3-W07A-BT-N1
Flat Bezel Panel PC with Intel® Celeron® N2807 Dual-Core CPU,
Touchscreen, Dual USB 3.0, Dual GbE LAN, Dual RS-232,
HD Audio, Wi-Fi 802.11a/b/g/n/ac, IP 65 Rating and RoHS
Rev. 1.04 - October 14, 2015
User Manual
User Manual
Page I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AFL3-W07A-BT-N1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IEI Technology AFL3-W07A-BT-N1

Summary of Contents for IEI Technology AFL3-W07A-BT-N1

  • Page 1 AFL3-W07A-BT-N1 Panel PC MODEL: AFL3-W07A-BT-N1 Flat Bezel Panel PC with Intel® Celeron® N2807 Dual-Core CPU, Touchscreen, Dual USB 3.0, Dual GbE LAN, Dual RS-232, HD Audio, Wi-Fi 802.11a/b/g/n/ac, IP 65 Rating and RoHS User Manual User Manual Page I Rev. 1.04 - October 14, 2015...
  • Page 2 AFL3-W07A-BT-N1 Panel PC Revision Date Version Changes Changed touch controller October 14, 2015 1.04 Added Section 3.11: OS Installation Updated Chapter 4: BIOS Setup Updated Table 6-13: Webcam Connector (CAM_USB1) Pinouts July 23, 2015 1.03 Updated the following sections: June 30, 2015 1.02...
  • Page 3 AFL3-W07A-BT-N1 Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 AFL3-W07A-BT-N1 Panel PC Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.

  • Page 5: Table Of Contents

    AFL3-W07A-BT-N1 Panel PC Table of Contents 1 INTRODUCTION......................1 1.1 O ........................2 VERVIEW 1.2 F ........................3 EATURES 1.3 F ......................3 RONT ANEL 1.4 R ....................... 4 ANEL 1.5 B ......................4 OTTOM ANEL 1.6 S .................... 5...
  • Page 6 AFL3-W07A-BT-N1 Panel PC 3.7.5 Stand Mounting ....................34 3.7.6 V-Stand Mounting..................... 35 3.8 P ..................37 OWERING N THE YSTEM 3.9 R ....................38 ESET THE YSTEM 3.10 C CMOS......................38 LEAR 3.11 OS I ....................39 NSTALLATION 3.12 S ..................
  • Page 7 AFL3-W07A-BT-N1 Panel PC 4.5 S ......................... 65 ECURITY 4.6 B ........................66 4.7 S & E ......................68 5 SYSTEM MAINTENANCE ..................70 5.1 S ..............71 YSTEM AINTENANCE NTRODUCTION 5.2 A ..................71 STATIC RECAUTIONS 5.3 T ....................72...
  • Page 8 AFL3-W07A-BT-N1 Panel PC B.1 S ..................... 93 AFETY RECAUTIONS B.1.1 General Safety Precautions ................93 B.1.2 Anti-static Precautions ..................94 B.1.3 Product Disposal ..................... 95 B.2 M ............95 AINTENANCE AND LEANING RECAUTIONS B.2.1 Maintenance and Cleaning................95 B.2.2 Cleaning Tools ....................96 C BIOS MENU OPTIONS.....................
  • Page 9 AFL3-W07A-BT-N1 Panel PC List of Figures Figure 1-1: AFL3-W07A-BT-N1 Flat Bezel Panel PC..............2 Figure 1-2: Front View ........................3 Figure 1-3: Rear View ........................4 Figure 1-4: Bottom Panel .......................5 Figure 1-5: AFL3-W07A-BT-N1 Dimensions (mm)...............8 Figure 3-1: Back Cover Retention Screws .................17 Figure 3-2: Open the Back Cover....................17...
  • Page 10 AFL3-W07A-BT-N1 Panel PC Figure 3-27: Clear CMOS Button Location.................38 Figure 3-28: BIOS Option–OS Selection ..................39 Figure 3-29: Keypad AP .......................41 Figure 5-1: Back Cover Retention Screws .................73 Figure 5-2: WLAN Card Location ....................74 Figure 5-3: Releasing the WLAN Card..................74 Figure 5-4: Removing the WLAN Card ..................75 Figure 6-1: Main Board Layout Diagram (Front Side) ...............77...
  • Page 11 AFL3-W07A-BT-N1 Panel PC List of Tables Table 1-1: System Specifications....................7 Table 6-1: BIOS Navigation Keys ....................44 Table 6-1: Peripheral Interface Connectors ................78 Table 6-2: Battery Connector (CN2) Pinouts ................78 Table 6-3: LVDS Connector (LVDS2) Pinouts................79 Table 6-4: MCU Connector (JSPI2) Pinouts ................80 Table 6-5: PCIe Mini Connector (M_PCIE1) Pinouts ..............80...
  • Page 12 AFL3-W07A-BT-N1 Panel PC List of BIOS Menus BIOS Menu 1: Main ........................45 BIOS Menu 2: Advanced ......................47 BIOS Menu 3: ACPI Settings .......................48 BIOS Menu 4: F81866 Super IO Configuration ................49 BIOS Menu 5: Serial Port n Configuration Menu...............49 BIOS Menu 6: F81866 H/W Monitor.....................52 BIOS Menu 7: RTC Wake Settings ....................53...

  • Page 13: Introduction

    AFL3-W07A-BT-N1 Panel PC Chapter Introduction Page 1...

  • Page 14: Overview

    1.1 Overview Figure 1-1: AFL3-W07A-BT-N1 Flat Bezel Panel PC The AFL3-W07A-BT-N1 is a dual-core Intel® Celeron® processor N2807 powered flat bezel panel PC with a rich variety of functions and peripherals. The compact design is ideal for easy and simplified integration into kiosk and point-of-sales (POS) applications.

  • Page 15: Features

    Optional RFID reader  IP 65 compliant front panel 1.3 Front Panel The front side of the AFL3-W07A-BT-N1 is a flat-bezel panel with a 7” TFT LCD screen surrounded by a PC/ABS plastic frame ( F igure 1-2). Figure 1-2: Front View There is a power LED indicator located on the front panel.

  • Page 16: Rear Panel

    The rear panel provides access to retention screw holes that support VESA mounting. F igure 1-5. Figure 1-3: Rear View 1.5 Bottom Panel The bottom panel of the AFL3-W07A-BT-N1 has the following connectors and switches F igure 1-6):  1 x 9 V ~ 30 V DC input power jack ...

  • Page 17: System Specifications

    AFL3-W07A-BT-N1 Panel PC Figure 1-4: Bottom Panel 1.6 System Specifications The technical specifications for the AFL3-W07A-BT-N1 systems are listed in T able 1-4. Specification AFL3-W07A-BT-N1 LCD Size 7" (16:9) Max. Resolution 1024 (W) x 600 (H) Brightness (cd/m2) Contrast Ratio 700:1 16.2M...
  • Page 18 AFL3-W07A-BT-N1 Panel PC One full-size PCIe Mini card slot for mSATA module installation Storage Audio Realtek ALC892 HD Audio codec One 2 W stereo speaker (left channel output only) Speaker Wireless One 802.11a/b/g/n/ac 1T1R wireless LAN module (half-size PCIe Mini card) Bluetooth Bluetooth 4.0...

  • Page 19: Table 1-1: System Specifications

    AFL3-W07A-BT-N1 Panel PC 2 x GbE LAN (RJ-45 connector) 2 x USB 3.0 connectors 1 x Power button 1 x AT/ATX switch 1 x Reset button 1 x 9 V ~ 30 V DC input jack Table 1-1: System Specifications...

  • Page 20: Dimensions

    AFL3-W07A-BT-N1 Panel PC 1.7 Dimensions The AFL3-W07A-BT-N1 dimensions are shown below.  190.9 mm Width:  127.3 mm Height: 43.4 mm  Depth: Figure 1-5: AFL3-W07A-BT-N1 Dimensions (mm) Page 8...

  • Page 21: Unpacking

    AFL3-W07A-BT-N1 Panel PC Chapter Unpacking Page 9...

  • Page 22: Unpacking

    AFL3-W07A-BT-N1 Panel PC 2.1 Unpacking To unpack the flat bezel panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the flat bezel panel PC has been properly installed.

  • Page 23: Packing List

    AFL3-W07A-BT-N1 Panel PC 2.2 Packing List The AFL3-W07A-BT-N1 flat bezel panel PC is shipped with the following components: Quantity Item Image AFL3-W07A-BT-N1 panel PC Power adapter (36 W) (P/N: 63040-010036-121-RS) Power cord (P/N: 32702-000400-200-RS) Screws for VESA mounting Screws for PCIe Mini card installation...

  • Page 24: Optional Items

    AFL3-W07A-BT-N1 Panel PC 2.3 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image VESA 75 wall mount kit (P/N: AFLWK-12) Panel mounting kit (P/N: AFL3PK-W07A-R10) Rack mount kit (P/N: AFL3RK-W07A-R10) (P/N: ARM-11-RS)
  • Page 25 AFL3-W07A-BT-N1 Panel PC Item and Part Number Image Stand (P/N:STAND-100-RS) LCD monitor stand with adjustable hinge (P/N: VSTAND-A07-R11) If any of these items are missing or damaged, contact the distributor or sales representative immediately. Page 13...

  • Page 26: Installation

    AFL3-W07A-BT-N1 Panel PC Chapter Installation Page 14...

  • Page 27: Anti-Static Precautions

    AFL3-W07A-BT-N1 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL3-W07A-BT-N1. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the AFL3-W07A-BT-N1 is accessed internally, or any other electrical component is handled, the following anti-static precautions are strictly adhered to.

  • Page 28: Installation And Configuration Steps

    Over-tightening back cover screws will crack the plastic frame. Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm). To install an mSATA module into the AFL3-W07A-BT-N1, please follow the steps below: Remove two (2) retention screws from the back cover ( Step 1: F igure 3-1).

  • Page 29: Figure 3-1: Back Cover Retention Screws

    AFL3-W07A-BT-N1 Panel PC Figure 3-1: Back Cover Retention Screws Remove the back cover from the device. See Figure 3-2. Step 2: Figure 3-2: Open the Back Cover Locate the full-size PCIe Mini card slot. Remove the preinstalled retention screw Step 3: on the screw pillar of the PCIe Mini card slot as shown in ( F igure 3-3).

  • Page 30: Figure 3-3: Msata Module Slot Location

    AFL3-W07A-BT-N1 Panel PC Figure 3-3: mSATA Module Slot Location Line up the notch on the mSATA module with the notch on the connector. Slide Step 4: the PCIe Mini card into the socket at an angle of about 20º. Secure the mSATA module with the retention screw. Push the other end of the...

  • Page 31: At/Atx Mode Selection

    AFL3-W07A-BT-N1 Panel PC 3.5 AT/ATX Mode Selection AT or ATX power mode can be used on the AFL3-W07A-BT-N1. The selection is made through an AT/ATX switch located on the bottom panel ( F igure 3-5). Figure 3-5: AT/ATX Switch Location 3.5.1 AT Power Mode...

  • Page 32: External Peripheral Device Connection

     USB devices To install these devices, connect the corresponding cable connector from the actual device to the corresponding AFL3-W07A-BT-N1 external peripheral interface connector making sure the pins are properly aligned. 3.6.1 LAN Connection The RJ-45 connector enables connection to an external network. To connect a LAN cable with an RJ-45 connector, please follow the instructions below.

  • Page 33: Serial Device Connection

    AFL3-W07A-BT-N1 Panel PC 3.6.2 Serial Device Connection Follow the steps below to connect a serial device to the DB-9 connector of the AFL3-W07A-BT-N1 panel PC. Locate the DB-9 connector. The location of the DB-9 connectors is shown in Step 1: Chapter 1.

  • Page 34: Mounting The System

    AFL3-W07A-BT-N1 Panel PC There are two USB 3.0 connectors on the AFL3-W07A-BT-N1. To connect a USB device, please follow the instructions below. Locate the USB connectors. The locations of the USB connectors are shown Step 1: in Chapter 1. Align the connectors. Align the USB device connector with one of the Step 2: connectors on the AFL3-W07A-BT-N1.

  • Page 35: Wall Mounting

    AFL3-W07A-BT-N1 Panel PC 3.7.1 Wall Mounting To mount the flat bezel panel PC onto the wall, please follow the steps below. Select the location on the wall for the wall-mounting bracket. Step 1: Carefully mark the locations of the four screw holes in the bracket on the wall.
  • Page 36 AFL3-W07A-BT-N1 Panel PC Insert the four monitor mounting screws provided in the wall mount kit into the Step 6: four screw holes on the real panel of the flat bezel panel PC and tighten until the screw shank is secured against the rear panel ( F igure 3-10).

  • Page 37: Figure 3-10: Chassis Support Screws

    AFL3-W07A-BT-N1 Panel PC Figure 3-10: Chassis Support Screws Secure the panel PC by fastening the retention screw of the wall-mounting Step 9: bracket. ( F igure 3-11). Figure 3-11: Secure the Panel PC Page 25...

  • Page 38: Panel Mounting

    AFL3-W07A-BT-N1 Panel PC 3.7.2 Panel Mounting To mount the AFL3-W07A-BT-N1 flat bezel panel PC into a panel, please follow the steps below. Select the position on the panel to mount the flat bezel panel PC. Step 1: Cut out a section corresponding to the size shown below. The size must be Step 2: smaller then the outer edge.

  • Page 39: Figure 3-13: Panel Mounting Kit Installation

    AFL3-W07A-BT-N1 Panel PC Repeat to install the other three screws into the sides of the two panel Step 5: Step 4 mounting brackets. Figure 3-13: Panel Mounting Kit Installation Align the panel mounting bracket screw holes with the VESA mounting holes on Step 6: the rear of the panel PC.

  • Page 40: Cabinet And Rack Installation

    Figure 3-14: Securing Panel Mounting Brackets 3.7.3 Cabinet and Rack Installation The AFL3-W07A-BT-N1 flat bezel panel PC can be installed into a cabinet or rack. The installation procedures are similar to the panel mounting installation. To do this, please follow the steps below:...

  • Page 41: Figure 3-15: Rack/Cabinet Bracket Installation

    AFL3-W07A-BT-N1 Panel PC Figure 3-15: Rack/Cabinet Bracket Installation Insert a M5*50 screw into the screw hole on the side of the rack mounting Step 2: bracket. Then, install the following components onto the screw in sequence. See Figure 3-16. Sequence...

  • Page 42: Figure 3-16: Rack Mounting Kit Installation

    AFL3-W07A-BT-N1 Panel PC Figure 3-16: Rack Mounting Kit Installation Align the rack mounting bracket screw holes with the VESA mounting holes on Step 4: the rear of the panel PC. Secure the two rack mounting brackets to the rear of the panel PC by inserting...

  • Page 43: Figure 3-17: Securing Rack Mounting Brackets

    AFL3-W07A-BT-N1 Panel PC Figure 3-17: Securing Rack Mounting Brackets Slide the panel PC with the attached rack/cabinet bracket into a rack or cabinet Step 6: (Figure 3-18). Figure 3-18: Install into a Rack/Cabinet Page 31...

  • Page 44: Arm Mounting

    When purchasing the arm please ensure that it is VESA compliant and that the arm has a 75 mm interface pad. If the mounting arm is not VESA compliant it cannot be used to support the AFL3-W07A-BT-N1 flat bezel panel PC.

  • Page 45: Figure 3-19: Arm Mounting Retention Screw Holes

    AFL3-W07A-BT-N1 Panel PC Figure 3-19: Arm Mounting Retention Screw Holes Secure the AFL3-W07A-BT-N1 to the interface pad by inserting four retention Step 4: screws through the mounting arm interface pad and into the AFL3-W07A-BT-N1.S t e p 0 : Figure 3-20: Arm Mounting...

  • Page 46: Stand Mounting

    3.7.5 Stand Mounting To mount the AFL3-W07A-BT-N1 using the stand mounting kit, please follow the steps below. Locate the screw holes on the rear of the AFL3-W07A-BT-N1. This is where the Step 1: bracket will be attached. Align the bracket with the screw holes.

  • Page 47: V-Stand Mounting

    AFL3-W07A-BT-N1 Panel PC 3.7.6 V-Stand Mounting To mount the AFL3-W07A-BT-N1 using the V-Stand mounting kit, please follow the steps below. Carefully mark the locations of the four V-Stand screw holes on the mounting Step 1: area. Drill four pilot holes at the marked locations for the V-Stand retention screws.

  • Page 48: Figure 3-23: Secure V-Stand To System

    AFL3-W07A-BT-N1 Panel PC Figure 3-23: Secure V-Stand to System Align the V-Stand screw holes with the pilot holes on the mounting area. Mount Step 5: the V-Stand by inserting the retention screws into the four pilot holes and tightening them.

  • Page 49: Powering On The System

    Connect the power cord to the power adapter. Connect the other end of the Step 1: power cord to a power source. Connect the power adapter to the power connector of the AFL3-W07A-BT-N1. Step 2: Locate the power button on the I/O panel.

  • Page 50: Reset The System

    Figure 3-26: Reset Button Location 3.10 Clear CMOS If the AFL3-W07A-BT-N1 fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information. To do this, push the clear CMOS button for three seconds, then restart the system. The clear CMOS button location is shown in Figure 3-27.

  • Page 51: Os Installation

    AFL3-W07A-BT-N1 Panel PC NOTE: To access the clear CMOS button, the plastic back cover must be removed. Please refer to Section 3.4: mSATA Module Installation (Step 1 2) for the instruction. Step 3.11 OS Installation WARNING: Before installing the operating system, the user must enter the Boot BIOS menu first and choose which operating system will be installed.

  • Page 52: Software Installation

    Visit the IEI website or contact technical support for the latest updates. All the drivers for the AFL3-W07A-BT-N1 are on the utility CD that came with the system. The utility CD contains drivers for Windows 7 and Windows 8 operating systems. Please select the corresponding drivers for the system.

  • Page 53: Keypad Ap

    AFL3-W07A-BT-N1 Panel PC 3.12.1 Keypad AP Keypad AP is an OSD control tool developed by IEI. After the installation, the Keypad AP can be accessed by clicking the icon on the notification area. It allows users to control screen brightness and audio volume.

  • Page 54: Bios Setup

    AFL3-W07A-BT-N1 Panel PC Chapter BIOS Setup Page 42...

  • Page 55: Introduction

    AFL3-W07A-BT-N1 Panel PC 4.1 Introduction A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed.

  • Page 56: Getting Help

    AFL3-W07A-BT-N1 Panel PC Left arrow Move to the item on the left hand side Right arrow Move to the item on the right hand side Increase the numeric value or make changes Decrease the numeric value or make changes F1 key...

  • Page 57: Main

    AFL3-W07A-BT-N1 Panel PC  Save & Exit – Selects exit options and loads default settings The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above. 4.2 Main The Main BIOS menu ( B IOS Menu 1) appears when the BIOS Setup program is entered.

  • Page 58: Cpu Information

    AFL3-W07A-BT-N1 Panel PC  Project Version: the board version  Build Date: Date the current BIOS version was made  CPU Information The CPU Information lists a brief summary of the CPU. The fields in CPU Information cannot be changed. The items shown in the system overview include: ...

  • Page 59: Advanced

    AFL3-W07A-BT-N1 Panel PC 4.3 Advanced Use the Advanced menu ( B IOS Menu 2) to configure the CPU and peripheral devices through the following sub-menus: WARNING: Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware.

  • Page 60: Bios Menu 3: Acpi Settings

    AFL3-W07A-BT-N1 Panel PC Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced ACPI Settings Select the highest ACPI sleep state the system ACPI Sleep State [S3 (Suspend to RAM)] will enter, when the SUSPEND button is pressed. ---------------------- : Select Screen...

  • Page 61: F81866 Super Io Configuration

    AFL3-W07A-BT-N1 Panel PC 4.3.2 F81866 Super IO Configuration Use the F81866 Super IO Configuration menu ( B IOS Menu 4) to set or change the configurations for the serial ports. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.

  • Page 62: Serial Port 1 Configuration

    AFL3-W07A-BT-N1 Panel PC 4.3.2.1.1 Serial Port 1 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disable the serial port Disabled  Enable the serial port Enabled EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.

  • Page 63: Serial Port 2 Configuration

    AFL3-W07A-BT-N1 Panel PC 4.3.2.1.2 Serial Port 2 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disable the serial port Disabled  Enable the serial port Enabled EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.

  • Page 64: F81866 H/W Monitor

    AFL3-W07A-BT-N1 Panel PC 4.3.3 F81866 H/W Monitor The F81866 H/W Monitor menu ( B IOS Menu 6) shows the operating temperatures and voltages. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced PC Health Status :+41 °C CPU temperature :+43 °C...

  • Page 65: Rtc Wake Settings

    AFL3-W07A-BT-N1 Panel PC 4.3.4 RTC Wake Settings The RTC Wake Settings menu ( B IOS Menu 7) configures RTC wake event. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event.

  • Page 66: Serial Port Console Redirection

    AFL3-W07A-BT-N1 Panel PC  If selected, the following appears with values that Enabled can be selected: *Wake up every day *Wake up date *Wake up hour *Wake up minute *Wake up second After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off.

  • Page 67: Iei Feature

    AFL3-W07A-BT-N1 Panel PC  Console Redirection [Disabled] Use Console Redirection option to enable or disable the console redirection function.  Disabled the console redirection function Disabled EFAULT  Enabled the console redirection function Enabled 4.3.6 IEI Feature Use the IEI Feature ( B IOS Menu 10) to configure One Key Recovery function.

  • Page 68: Cpu Configuration

    AFL3-W07A-BT-N1 Panel PC 4.3.7 CPU Configuration Use the CPU Configuration ( B IOS Menu 10) to view detailed CPU specifications and configure the CPU. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced CPU Configuration When enabled, a VMM can utilize the additional Intel(R) Celeron(R) CPU N2807 @ 1.58GHz...

  • Page 69: Intel Virtualization Technology [Disabled]

    AFL3-W07A-BT-N1 Panel PC  L2 Cache: Lists the amount of storage space on the L2 cache.  L3 Cache: Lists the amount of storage space on the L3 cache. 64-bit: Indicates if 64-bit OS is supported by the CPU. ...

  • Page 70: Ide Configuration

    AFL3-W07A-BT-N1 Panel PC 4.3.8 IDE Configuration Use the IDE Configuration menu ( B IOS Menu 11) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.

  • Page 71: Usb Configuration

    AFL3-W07A-BT-N1 Panel PC 4.3.9 USB Configuration Use the USB Configuration menu ( B IOS Menu 12) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.

  • Page 72: Chipset

    AFL3-W07A-BT-N1 Panel PC  Legacy USB support enabled Enabled EFAULT  Legacy USB support disabled Disabled  Legacy USB support disabled if no USB devices are Auto connected 4.4 Chipset Use the Chipset menu ( B IOS Menu 13) to access the North Bridge, South Bridge, and Integrated Graphics configuration menus.

  • Page 73: North Bridge Configuration

    AFL3-W07A-BT-N1 Panel PC 4.4.1 North Bridge Configuration Use the North Bridge menu ( B IOS Menu 14) to configure the north bridge chipset. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Chipset > Intel IGD Configuration Config Intel IGD...

  • Page 74: Dvmt Pre-Allocated [256M]

    AFL3-W07A-BT-N1 Panel PC  DVMT Pre-Allocated [256M] Use the DVMT Pre-Allocated option to specify the amount of system memory that can be used by the internal graphics device.  64 MB of memory used by internal graphics device  128 MB of memory used by internal graphics...

  • Page 75: South Bridge Configuration

    AFL3-W07A-BT-N1 Panel PC 4.4.2 South Bridge Configuration Use the South Bridge menu ( B IOS Menu 16) to configure the south bridge chipset. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Chipset Auto Power Button Status [Disable (ATX)]...

  • Page 76: Pci Express Configuration

    AFL3-W07A-BT-N1 Panel PC  The High Definition Audio controller is enabled. Enabled EFAULT 4.4.2.1 PCI Express Configuration Use the PCI Express Configuration submenu (BIOS Menu 17) to configure the PCI Express slots. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.

  • Page 77: Security

    AFL3-W07A-BT-N1 Panel PC 4.5 Security Use the Security menu (BIOS Menu 18) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Password Description Set Administrator Password If ONLY the Administrator’s password is set,...

  • Page 78: Boot

    AFL3-W07A-BT-N1 Panel PC 4.6 Boot Use the Boot menu ( B IOS Menu 19) to configure system boot options. Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard...

  • Page 79: Quiet Boot [Enabled]

    AFL3-W07A-BT-N1 Panel PC  Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.  Normal POST messages displayed Disabled  OEM Logo displayed instead of POST messages Enabled EFAULT  UEFI Boot [Disabled] Use the UEFI Boot BIOS option to enable or disable UEFI boot.

  • Page 80: Save & Exit

    AFL3-W07A-BT-N1 Panel PC  Launch PXE OpROM [Disabled] Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices.  Ignore all PXE Option ROMs Disabled EFAULT  Load PXE Option ROMs Enabled  Option ROM Messages [Force BIOS] Use the Option ROM Messages option to set the Option ROM display mode.

  • Page 81: Bios Menu 20: Save & Exit

    AFL3-W07A-BT-N1 Panel PC Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Reset the system after Discard Changes and Reset saving the changes. Restore Defaults Save as User Defaults...

  • Page 82: System Maintenance

    AFL3-W07A-BT-N1 Panel PC Chapter System Maintenance Page 70...

  • Page 83: System Maintenance Introduction

    AFL3-W07A-BT-N1 Panel PC 5.1 System Maintenance Introduction If the components of the AFL3-W07A-BT-N1 fail they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts. Back cover removal instructions for the AFL3-W07A-BT-N1 are described below.

  • Page 84: Turn Off The Power

    Over-tightening back cover screws will crack the plastic frame. Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm). To access the AFL3-W07A-BT-N1 internally the back cover must be removed. To remove the back cover, please follow the steps below.

  • Page 85: Wlan Card Replacement

    Carefully separate the back cover from the chassis and lift the cover of the Step 4: device Step 0: 5.5 WLAN Card Replacement The AFL3-W07A-BT-N1 has one WLAN card slot. To replace the WLAN card, follow the instructions below. Follow all anti-static procedures. See Section Step 1: 5 .2.

  • Page 86: Figure 5-2: Wlan Card Location

    AFL3-W07A-BT-N1 Panel PC Figure 5-2: WLAN Card Location Disconnect the antenna cables on the WLAN module and remove the retention Step 5: screw to release the WLAN card ( F igure 5-3). Figure 5-3: Releasing the WLAN Card Page 74...

  • Page 87: Reinstalling The Cover

    AFL3-W07A-BT-N1 Panel PC Grasp the WLAN card by the edges and carefully pull it out of the socket ( Step 6: F igure 5-4). Figure 5-4: Removing the WLAN Card Install a new WLAN card by inserting the card into the slot at an angle.

  • Page 88: Interface Connectors

    AFL3-W07A-BT-N1 Panel PC Chapter Interface Connectors Page 76...

  • Page 89: Peripheral Interface Connectors

    AFL3-W07A-BT-N1 Panel PC 6.1 Peripheral Interface Connectors The AFL3-W07A-BT-N1 panel PC motherboard comes with a number of peripheral interface connectors and configuration jumpers. The connector locations are shown in F igure 6-1. The Pin 1 locations of the on-board connectors are also indicated in the diagram below.

  • Page 90: Internal Peripheral Connectors

    AFL3-W07A-BT-N1 Panel PC 6.2 Internal Peripheral Connectors Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. The table below shows a list of the peripheral interface connectors on the AFL3MB1-BT. Pinouts of these connectors can be found in the following sections.

  • Page 91: Lvds Connector (Lvds2)

    AFL3-W07A-BT-N1 Panel PC 6.2.2 LVDS Connector (LVDS2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC_LCD_COM LVDSA3+ +VCC_LCD2 +VCC_LCD2 LCD_RST_IN_3V3 LCD_STBY_IN_3V3- LCD_DIMO LVDSA0- LCD_SELB LVDSA0+ VCC_LCD_AVDD LVDSA1- VLED- LVDSA1+ VLED- LCD_LR LVDSA2- LCD_UD LVDSA2+ LCD_VGL LCD_CABC_EN1 LVDSACLK- LCD_CABC_EN0 LVDSACLK+ LCD_VGH VLED+ LVDSA3-...

  • Page 92: Pcie Mini Connector, Full-Size (M_Pcie1)

    AFL3-W07A-BT-N1 Panel PC Table 6-4: MCU Connector (JSPI2) Pinouts 6.2.4 PCIe Mini Connector, Full-Size (M_PCIE1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION WAKE# VCC3 VCC1.5 CLKREQ# REFCLK0- REFCLK0+ PERST# MPCIE_RXD- VCC3_AUX MPCIE_RXD+ VCC1.5 SMB_CLK MPCIE_TXD- SMB_DATA MPCIE_TXD+ USB_DATA1- USB_DATA1+ VCC3_AUX VCC3_AUX VCC1.5...

  • Page 93: Pcie Mini Connector, Half-Size (M_Pcie2)

    AFL3-W07A-BT-N1 Panel PC 6.2.5 PCIe Mini Connector, Half-Size (M_PCIE2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION WAKE# VCC3 VCC1.5 CLKREQ# REFCLK0- REFCLK0+ PERST# MPCIE_RXD- VCC3_AUX MPCIE_RXD+ VCC1.5 SMB_CLK MPCIE_TXD- SMB_DATA MPCIE_TXD+ USB_DATA1- USB_DATA1+ VCC3_AUX VCC3_AUX VCC1.5 mSATA_DET# VCC3 Table 6-6: PCIe Mini Connector (M_PCIE2) Pinouts...

  • Page 94: Power Led Connector (Pw_Led1)

    AFL3-W07A-BT-N1 Panel PC 6.2.6 Power LED Connector (PW_LED1) PIN NO. DESCRIPTION PW_LED +5V SUS PW LED +5V Table 6-7: Power LED Connector (PW_LED1) Pinouts 6.2.7 Speaker Connector (CN3) PIN NO. DESCRIPTION AUD_OUTL+ AUD_OUTL- AUD_OUTR- AUD_OUTR+ Table 6-8: Speaker Connector (CN3) Pinouts 6.2.8 SPI Flash Connector (JSPI1)

  • Page 95: Usb 2.0 Connector (Hub_Usb1)

    AFL3-W07A-BT-N1 Panel PC DATA3+ DATA3- +3.3V Table 6-10: Touch Panel Connector (TOUCH_USB1) Pinouts 6.2.10 USB 2.0 Connector (HUB_USB1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION     DATA4- DATA3+     DATA4+ DATA3- Table 6-11: USB 2.0 Connector (HUB_USB1) Pinouts 6.2.11 VGA Connector (VGA_CON1)

  • Page 96: External Interface Panel Connectors

    AFL3-W07A-BT-N1 Panel PC Table 6-13: Webcam Connector (CAM_USB1) Pinouts 6.3 External Interface Panel Connectors The table below lists the rear panel connectors on the AFL2MB-15A motherboard. Pinouts of these connectors can be found in the following sections. Connector Type Label...

  • Page 97: Power Connector (Cn5)

    AFL3-W07A-BT-N1 Panel PC 6.3.2 Power Connector (CN5) Table 6-16: Power Connector (CN5) Pinouts 6.3.3 RS-232 DB-9 Serial Ports (COM1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION NDCD1 NDSR1 NRX1 NRTS1 NTX1 NCTS1 NDTR1 NRI1 Table 6-17: RS-232 DB-9 Serial Ports (COM1) Pinouts 6.3.4 RS-232 DB-9 Serial Ports (COM2)

  • Page 98: Usb 3.0 Connectors (Usb_Con1)

    AFL3-W07A-BT-N1 Panel PC 6.3.5 USB 3.0 Connectors (USB_CON1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION USB3_PWR1 USB3_PWR2 USB2P0_DM1_L USB2P0_DM2_L USB2P0_DP1_L USB2P0_DP2_L USB3P0_RXDN1_L USB3P0_RXDN2_L USB3P0_RXDP1_L USB3P0_RXDP2_L USB3P0_TXDN1_C_L USB3P0_TXDN2_C_L USB3P0_TXDP1_C_L USB3P0_TXDP2_C_L Table 6-19: USB 3.0 Connectors (USB_CON1) Pinouts Page 86...

  • Page 99: A Regulatory Compliance

    AFL3-W07A-BT-N1 Panel PC Appendix Regulatory Compliance Page 87...
  • Page 100 AFL3-W07A-BT-N1 Panel PC DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives:  EMC Directive 2004/108/EC  Low-Voltage Directive 2006/95/EC  RoHS II Directive 2011/65/EU  Ecodesign Directive 2009/125/EC If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 101 AFL3-W07A-BT-N1 Panel PC Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ...
  • Page 102 AFL3-W07A-BT-N1 Panel PC Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 1999/5/CE. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
  • Page 103 AFL3-W07A-BT-N1 Panel PC FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference, and  This device must accept any interference received, including interference that may cause undesired operation.

  • Page 104: B Safety Precautions

    AFL3-W07A-BT-N1 Panel PC Appendix Safety Precautions Page 92...

  • Page 105: Safety Precautions

    Do not apply voltage levels that exceed the specified voltage range. Doing so may cause fire and/or an electrical shock.  Electric shocks can occur if the AFL3-W07A-BT-N1 chassis is opened when the AFL3-W07A-BT-N1 is running.  Do not drop or insert any objects into the ventilation openings of the AFL3-W07A-BT-N1.

  • Page 106: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL3-W07A-BT-N1. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the AFL3-W07A-BT-N1 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

  • Page 107: Product Disposal

    Please follow the national guidelines for electrical and electronic product disposal. B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the AFL3-W07A-BT-N1, please follow the guidelines below. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the AFL3-W07A-BT-N1, please read the details below. Page 95...

  • Page 108: Cleaning Tools

    Some components in the AFL3-W07A-BT-N1 may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the AFL3-W07A-BT-N1. ...

  • Page 109: Cbios Menu Options

    AFL3-W07A-BT-N1 Panel PC Appendix BIOS Menu Options Page 97...
  • Page 110 AFL3-W07A-BT-N1 Panel PC 　 BIOS Information .........................45 　 CPU Information........................46 　 Memory Information ......................46 　 TXE Information ........................46 　 System Date [xx/xx/xx] ......................46 　 System Time [xx:xx:xx] .......................46 　 ACPI Sleep State [S3 (Suspend to RAM)]................48 　 Serial Port [Enabled]......................50 　...
  • Page 111 AFL3-W07A-BT-N1 Panel PC 　 Save Changes and Reset ....................69 　 Discard Changes and Reset ....................69 　 Restore Defaults ........................69 　 Save as User Defaults ......................69 　 Restore User Defaults ......................69 Page 99...

  • Page 112: D Watchdog Timer

    AFL3-W07A-BT-N1 Panel PC Appendix Watchdog Timer Page 100...
  • Page 113 AFL3-W07A-BT-N1 Panel PC NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working. The system may stop working because of external EMI or software bugs.
  • Page 114 AFL3-W07A-BT-N1 Panel PC NOTE: The Watchdog Timer is activated through software. The software application that activates the Watchdog Timer must also deactivate it when closed. If the Watchdog Timer is not deactivated, the system will automatically restart after the Timer has finished its countdown.

  • Page 115: E Hazardous Materials Disclosure

    AFL3-W07A-BT-N1 Panel PC Appendix Hazardous Materials Disclosure Page 103...

  • Page 116: Hazardous Material Disclosure Table For Ipb Products Certified As Rohs Compliant Under 2002/95/Ec Without Mercury

    AFL3-W07A-BT-N1 Panel PC E.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
  • Page 117 AFL3-W07A-BT-N1 Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply...
  • Page 118 AFL3-W07A-BT-N1 Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。...

Table of Contents