Figure 3-27: Panel Mounting Kit Installation - IEI Technology AFL3-W10A-AL User Manual

Step 3: Repeat Step 4
mounting brackets.

Figure 3-27: Panel Mounting Kit Installation

Step 4:
Align the panel mounting bracket screw holes with the VESA mounting holes on
the rear of the panel PC.
Step 5: Secure the two panel mounting brackets to the rear of the panel PC by inserting
the four retention screws into the VESA mounting holes and tightening them
(Figure 3-28).S t e p 0 :
NOTE:
The panel mounting kit described in this section is an optional item. To
purchase it, please contact an IEI sales representative.
Page 42
AFL3-W10A/12A/W15A-AL Panel PC
to install the other three screws into the sides of the two panel