Figure 3-9: Hdd Retention Screws; Figure 3-10: Hdd Installation - IEI Technology AFL3-W10A-AL User Manual

AFL3-W10A/12A/W15A-AL Panel PC

Figure 3-9: HDD Retention Screws

Step 4:
Connect the SATA cable to the rear of HDD from the motherboard.
Step 5:
Install the HDD into the AFL3-W10A/12A/W15A-AL by aligning the retention
screw holes in the HDD brackets with the retention screw holes on the chassis.
Insert the four retention screws.

Figure 3-10: HDD Installation

Step 6: Replace the plastic back cover. Step 0:
Page 27