Figure 3-6: M.2 Slot Location; Figure 3-7: M.2 Ssd Installation - IEI Technology AFL3-W10A-AL User Manual

AFL3-W10A/12A/W15A-AL Panel PC

Figure 3-6: M.2 Slot Location

Step 3:
Line up the notch on the M.2 SSD with the notch on the connector. Slide the M.2
SSD into the socket at an angle of about 20º (Figure 3-7).
Step 4: Secure the M.2 SSD with the retention screw. Push the other end of the M.2
SSD down and secure the card with the previously removed retention screw
(Figure 3-7).

Figure 3-7: M.2 SSD Installation

Step 5: IMPORTANT!
module. The sticky side must face down.
Step 6: Reinstall the back cover and secure it using the retention screws.
Attach the thermal pad come with the system onto the SSD
Step 0:
Page 25