Restore On Ac Power Loss [Last State]; Usb Power Sw1 [+5V Dual] - IEI Technology AFL3-W10A-AL User Manual

Restore on AC Power Loss [Last State]


Use the Restore on AC Power Loss BIOS option to specify what state the system
returns to if there is a sudden loss of power to the system.

Power Off

Power On

Last State

USB Power SW1 [+5V DUAL]


Use the USB Power SW1 BIOS option to configure whether to provide power to the
external USB 3.0 connectors when the system is in S3/S4 sleep state. This option is valid
only when the above Power Saving Function BIOS option (see Section 4.3.7) is
disabled.

+5V DUAL

+5V
Page 80
AFL3-W10A/12A/W15A-AL Panel PC
The system remains turned off
The system turns on
D The system returns to its previous state. If it was on, it
EFAULT
turns itself on. If it was off, it remains off.
D Power is provided to the external USB 3.0 connectors
EFAULT
when the system is in S3/S4 sleep state
Power is not provided to the external USB 3.0
connectors when the system is in S3/S4 sleep state