Sata Configuration; Bios Menu 22: Sata Configuration; Stat Controller [Enable]; Sata Mode Selection [Ahci] - IEI Technology AFL3-W10A-AL User Manual

4.4.2.3 SATA Configuration

Use the SATA Configuration menu (BIOS Menu 22) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Chipset
SATA Configuration
STAT Controller
SATA Mode Selection
SATA1
M2_1
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.

BIOS Menu 22: SATA Configuration

STAT Controller [Enable]


Use the STAT Controller(s) option to enable or disable the SATA device.

Enable

Disable

SATA Mode Selection [AHCI]


Use the SATA Mode Selection option to configure SATA devices as AHCI devices.

AHCI
Page 84
AFL3-W10A/12A/W15A-AL Panel PC
[Enable]
[AHCI]
Empty
Empty
D Enables the SATA device.
EFAULT
Disables the SATA device.
D Configures SATA devices as AHCI device.
EFAULT
Enables or Disables the
Chipset SATA Controller.
The Chipset SATA
controller supports the
2 black internal SATA
ports (up to 3Gb/s
supported per port).
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit