Introduction; Starting Setup; Using Setup - IEI Technology AFL3-W10A-AL User Manual

4.1 Introduction

A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup
program allows users to modify the basic system configuration. This chapter describes
how to access the BIOS setup program and the configuration options that may be
changed.
NOTE:
Some of the BIOS options may vary throughout the life cycle of the
product and are subject to change without prior notice.

4.1.1 Starting Setup

The UEFI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Press the DEL key as soon as the system is turned on or
2. Press the DEL key when the "Press DEL to enter SETUP" message
If the message disappears before the DEL key is pressed, restart the computer and try
again.

4.1.2 Using Setup

Use the arrow keys to highlight items, press E
PageDown keys to change entries, press F1 for help and press E
keys are shown in the following table.
Key
Up arrow Move to the item above
Down arrow Move to the item below
Page 58
AFL3-W10A/12A/W15A-AL Panel PC
appears on the screen. 0.
Function
to select, use the PageUp and
NTER
to quit. Navigation
SC