Flat bezel panel pc with intel celeron j3455 quad-core cpu, touchscreen, dual usb 3.1 gen 1, dual gbe lan, serial ports, hdmi, hd audio, wi-fi, bluetooth, optional poe and rohs
Flat bezel panel pc with intel celeron j1900 quad-core cpu, touchscreen, deal usb 3.2 gen 1, dual gbe lan, rs-232, hd audio, wi-fi 802.11a/b/g/n/ac and rohs (142 pages)
Flat bezel panel pc with intel core i5-6300u / celeron 3955u cpu, touchscreen, four usb 3.0, dual gbe lan, rs-232/422/485, hd audio, wi-fi 802.11a/b/g/n/ac and rohs (144 pages)
Flat bezel panel pc with intel core i5-6300u / celeron 3955u cpu, touchscreen, four usb 3.0, dual gbe lan, rs-232/422/485, hd audio, wi-fi 802.11a/b/g/n/ac and rohs (20 pages)
Flat bezel panel pc with intel core i5-6300u / celeron 3955u cpu, touchscreen, four usb 3.1 gen 1, dual gbe lan, rs-232/422/485, hd audio, wi-fi 802.11a/b/g/n/ac and rohs (151 pages)
Flat bezel panel pc with intel core i5-8365ue cpu, touchscreen, four usb 3.2 gen 2, dual poe gbe lan, rs-232/422/485, bluetooth, wi-fi 802.11a/b/g/n/ac and rohs (144 pages)
Flat bezel panel pc with intel celeron n2807 dual-core cpu, touchscreen, dual usb 3.2 gen 1, dual gbe lan, dual rs-232, hd audio, wi-fi 802.11a/b/g/n/ac and rohs (118 pages)
Intel atom n270 cpu, touchscreen gigabit etherner, usb, audio, rs-232/422/485, sata rohs compliant, ip 64 protection (141 pages)
Summary of Contents for IEI Technology AFL3-W10A-AL
Page 1
AFL3-W10A/12A/W15A-AL Panel PC MODEL: AFL3-W10A/12A/W15A-AL Flat Bezel Panel PC with Intel® Celeron® J3455 Quad-Core CPU, Touchscreen, Dual USB 3.1 Gen 1, Dual GbE LAN, Serial Ports, HDMI, HD Audio, Wi-Fi, Bluetooth, Optional PoE and RoHS User Manual User Manual Page I Rev.
Page 2
AFL3-W10A/12A/W15A-AL Panel PC Revision Date Version Changes July 22, 2019 1.00 Initial release Page II...
Page 3
AFL3-W10A/12A/W15A-AL Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Page 4
AFL3-W10A/12A/W15A-AL Panel PC Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product. NOTE These messages inform the reader of essential but non-critical information.
Page 12
AFL3-W10A/12A/W15A-AL Panel PC List of Tables Table 1-1: Model Variations ......................3 Table 1-2: System Specifications ....................9 Table 3-1: RS-232/422/485 Serial Port Pinouts ................33 Table 3-2: DB-9 Serial Port Pin 9 Setting Jumper Settings ............34 Table 3-3: DB-9 Serial Port (COM1) Pinouts ................36 Table 3-4: Flash Descriptor Security Override Jumper Settings ..........
Page 13
AFL3-W10A/12A/W15A-AL Panel PC Table 6-25: Power Connector (PWR1) Pinouts ................106 Table 6-26: HDMI Connector (HDMI1) Pinouts .................107 Table 6-27: RS-232 RJ-45 Serial Port (COM1) Pinouts ............107 Table 6-28: RS-232/422/485 DB-9 Serial Port (COM2) Pinouts ..........108 Table 6-29: USB 2.0 Connectors (USB20_CN1) Pinouts ............108 Table 6-30: USB 3.1 Gen 1 Connectors (USB3-1) Pinouts............108 Table 6-31: Preconfigured Jumpers ..................109 Table 6-32: LVDS Voltage Selection Jumper (J_VLVDS1) Settings ........109...
Page 14
AFL3-W10A/12A/W15A-AL Panel PC List of BIOS Menus BIOS Menu 1: Main ........................60 BIOS Menu 2: Advanced ......................61 BIOS Menu 3: ACPI Settings ....................... 62 BIOS Menu 4: F81866 Super IO Configuration ................63 BIOS Menu 5: Serial Port n Configuration Menu ............... 64 BIOS Menu 6: iWDD H/W Monitor ....................
AFL3-W10A/12A/W15A-AL Panel PC 1.1 Overview Figure 1-1: AFL3-W10A/12A/W15A-AL Panel PC The AFL3-W10A/12A/W15A-AL series is a quad-core Intel® Celeron® processor J3455 powered flat bezel panel PC with a rich variety of functions and peripherals. The flat-bezel design is ideal for easy and simplified integration into various applications. The Intel®...
AFL3-W10A/12A/W15A-AL Panel PC 1.2 Model Variations The model numbers and model variations are listed below. Model Size 2.5" HDD Bay VESA Mount E-Window AFL3-W10A-AL-J2/P/PC/4G 10.1" AFL3-12A-AL-J2/P/PC/4G 12.1" 75 & 100 AFL3-W15A-AL-J2/P/PC/4G 15.6" 75 & 100 Table 1-1: Model Variations 1.3 Features...
AFL3-W10A/12A/W15A-AL Panel PC 1.4 Front Panel The front side of the AFL3-W10A/12A/W15A-AL is a flat-bezel panel with a TFT LCD screen surrounded by a PC/ABS plastic frame (Figure 1-2). Figure 1-2: Front View There is a power LED indicator located on the front panel. The status descriptions of the power LED indicator are listed below.
AFL3-W10A/12A/W15A-AL Panel PC 1.5 Rear Panel The rear panel provides access to retention screw holes that support VESA mounting. See Figure 1-3 and Figure 1-4. Figure 1-3: AFL3-W10A-AL Rear View Figure 1-4: AFL3-12A-AL/AFL3-W15A-AL Rear View Page 5...
AFL3-W10A/12A/W15A-AL Panel PC 1.6 Bottom Panel The bottom panel of the AFL3-W10A/12A/W15A-AL has the following connectors and switches (Figure 1-5). Figure 1-5: Bottom Panel 1.7 Side Panel The left side panel of the AFL3-12A-AL / AFL3-W15A-AL has one E-Window that supports a variety of IEI modules to provide additional connector interface.
AFL3-W10A/12A/W15A-AL Panel PC 1.8 System Specifications The technical specifications for the AFL3-W10A/12A/W15A-AL systems are listed below. Specification AFL3-W10A-AL AFL3-12A-AL AFL3-W15A-AL LCD Size 10.1" 12.1" 15.6" (16:9) Max. Resolution 1280 (W) x 800 (H) 1024 (W) x 768 (H) 1366 (W) x 768 (H)
Page 22
AFL3-W10A/12A/W15A-AL Panel PC RFID Reader MIFARE 13.56 MHz card reader (optional) Card Reader Magnetic stripe card reader (optional) Construction Material PC+ABS plastic VESA Mount 75 mm x 75 mm 75 mm x 75 mm 75 mm x 75 mm 100 mm x 100 mm 100 mm x 100 mm Mounting Panel, wall, rack, stand or arm mounting...
AFL3-W10A/12A/W15A-AL Panel PC I/O Ports and Switches 1 x Audio line-out port 1 x RS-232/422/485 serial port (DB-9 connector) 1 x RS-232 serial port (RJ-45 connector) 2 x GbE LAN (RJ-45 connector) 2 x USB 3.1 Gen 1 (5 Gb/s) connectors 2 x USB 2.0 connectors 1 x HDMI output connector 1 x Power button...
AFL3-W10A/12A/W15A-AL Panel PC 1.9 Dimensions The following sections list the dimensions of each model. 1.9.1 AFL3-W10A-AL Dimensions The AFL3-W10A-AL dimensions are shown below. Figure 1-7: AFL3-W10A-AL Dimensions (mm) Page 10...
AFL3-W10A/12A/W15A-AL Panel PC 2.1 Unpacking To unpack the panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the panel PC has been properly installed.
The AFL3-W10A/12A/W15A-AL panel PC is shipped with the following components: Quantity Item Image AFL3-W10A/12A/W15A-AL panel PC 36 W power adapter for AFL3-W10A-AL 60 W power adapter for AFL3-12A-AL and AFL3-W15A-AL Power cord RJ-45 to DB-9 COM port cable Thermal pad for M.2 SSD module...
AFL3-W10A/12A/W15A-AL Panel PC Screws (M4*6) for VESA mounting Screws (M3*4) for HDD installation Backup screws for rear panel installation 2.3 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image PoE module kit (P/N: AFL3-PD-BT01-KIT01-R10) RFID reader kit VESA 75 wall mount kit...
Page 31
AFL3-W10A/12A/W15A-AL Panel PC Item and Part Number Image Panel mounting kit for 10.1" and 12.1" SKUs (P/N: AFL3PK-08A-R10) Panel mounting kit for 15.6" SKU (P/N: AFL3PK-W15A-R10) Rack mounting kit (10.1": AFL3RK-W10A-R10 12.1": AFL3RK-12A-R10 15.6": AFL3RK-W15A-R11) (P/N: ARM-11-RS) (P/N: ARM-31-RS) Stand for VESA 100 (P/N: STAND-A12-RS) Stand for VESA 75/VESA 100 (P/N: STAND-C12-R10)
Page 32
AFL3-W10A/12A/W15A-AL Panel PC Item and Part Number Image LCD monitor stand with adjustable hinge (10.1": VSTAND-A10 12.1": VSTAND-A12) Magnetic card reader (P/N: AFL3P-W10MSR-U-R10) Barcode scanner (P/N: AFL3-2D-R11) If any of these items are missing or damaged, contact the distributor or sales representative immediately.
AFL3-W10A/12A/W15A-AL Panel PC 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the AFL3-W10A/12A/W15A-AL may result in permanent damage to the AFL3-W10A/12A/W15A-AL and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL3-W10A/12A/W15A-AL.
Remove the retention screws from the back cover. Two types of screw are used for securing the back cover of the 12.1" and 15.6" models. See the following diagrams for detail. Be aware of this for reinstalling the back cover. Figure 3-1: AFL3-W10A-AL Back Cover Retention Screws Page 21...
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-2: AFL3-12A-AL Back Cover Retention Screws Figure 3-3: AFL3-W15A-AL Back Cover Retention Screws Step 2: Slide the back cover toward the I/O panel until it is disengaged from the locking mechanism. Then, lift the back cover off the chassis. See Figure 3-4. Page 22...
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-4: Remove the Back Cover 3.4.1 Reinstalling the Back Cover To install the back cover, slide the back cover toward the top cover until the external and internal locking mechanisms are both clipped into place. Then, secure the back cover with the previously removed screws.
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-5: Internal Locking Mechanism 3.5 M.2 SSD Installation To install an M.2 SSD into the AFL3-W10A/12A/W15A-AL, please follow the steps below: Step 1: Remove the plastic back cover. See Section 3.4 above. Step 2: Locate the M.2 B-key 2242 slot. Remove the preinstalled retention screw on the screw pillar of the M.2 slot as shown in Figure 3-6.
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-6: M.2 Slot Location Step 3: Line up the notch on the M.2 SSD with the notch on the connector. Slide the M.2 SSD into the socket at an angle of about 20º (Figure 3-7). Step 4: Secure the M.2 SSD with the retention screw.
AFL3-W10A/12A/W15A-AL Panel PC 3.6 HDD Installation NOTE: The HDD drive bay is only available in the 12.1" and 15.6" models. For the 10.1" model, please install M.2 SSD as the storage device. To install the HDD into the system, please follow the steps below: Step 1: Remove the plastic back cover.
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-9: HDD Retention Screws Step 4: Connect the SATA cable to the rear of HDD from the motherboard. Step 5: Install the HDD into the AFL3-W10A/12A/W15A-AL by aligning the retention screw holes in the HDD brackets with the retention screw holes on the chassis. Insert the four retention screws.
AFL3-W10A/12A/W15A-AL Panel PC 3.7 PoE Module Installation (Optional) A PoE module (32 V ~ 57 V input, 12 V output) must be installed and connected before start using the panel PC as a PoE powered device (PD). To install the optional PoE module, follow the steps below.
AFL3-W10A/12A/W15A-AL Panel PC Step 3: The space for installing the PoE module is located inside the chassis, above the motherboard. Secure the PoE module to the panel PC by using two retention screws as shown in Figure 3-12. Step 4: Connect the two cables to the connectors on the motherboard as shown below.
AFL3-W10A/12A/W15A-AL Panel PC 3.8 RFID Reader Kit Installation (Optional) The optional RFID reader provided by IEI supports ISO15693, ISO14443A/B, Felica, Mifare, Tag-it, ST LRI 1K and ST M24LRXX protocols. To install the RFID reader kit, follow the steps below. Figure 3-13: RFID Reader Kit Step 1: Remove the plastic back cover.
Peel off the backing from the rubber foam and stick it to the system as shown in the following diagrams. Step 8: Peel off the backing from the antenna and attach the antenna to the system as shown in the following diagrams. Step 0: Figure 3-14: AFL3-W10A-AL RFID Reader Installation Page 31...
AFL3-W10A/12A/W15A-AL Panel PC 3.9 AT/ATX Mode Selection AT or ATX power mode can be used on the AFL3-W10A/12A/W15A-AL. The selection is made through an AT/ATX switch located on the bottom panel (Figure 3-17). Figure 3-17: AT/ATX Switch Location 3.10 COM2 RS-232/422/485 Selection The bottom panel of the AFL3-W10A/12A/W15A-AL has one D-sub 9 male connectors for RS-232/422/485 connection.
AFL3-W10A/12A/W15A-AL Panel PC 3.10.2 COM2 Pin 9 Selection The JP2 jumper configures pin 9 on the DB-9 serial port. Pin 9 on the COM2 DB-9 connector can be set as the ring (RI) signal, +5 V or +12 V. The jumper selection options are shown in Table 3-2.
AFL3-W10A/12A/W15A-AL Panel PC 3.11 COM1 Connection The COM1 port is a RJ-45 serial device connector on the bottom panel. The COM1 port connects to a cable with a standard D-sub 9 connector at the other end (cables included). Follow the steps below to connect a serial device to the AFL3-W10A/12A/W15A-AL panel Step 1: Locate the RJ-45 connector.
AFL3-W10A/12A/W15A-AL Panel PC Step 2: Update the BIOS and ME firmware, and then turn off the system power. Step 3: Remove the metal clip on the Flash Descriptor Security Override jumper. Step 4: Restart the system. The system will reboot 2 ~ 3 times to complete the ME update.Step 0: firmware 3.13 Mounting the System...
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-21: Wall-mounting Bracket Step 6: Insert the four monitor mounting screws provided in the wall mount kit into the four screw holes on the real panel of the panel PC and tighten until the screw shank is secured against the rear panel (Figure 3-22). WARNING: Please use the M4 screws provided in the wall mount kit for the rear panel.
AFL3-W10A/12A/W15A-AL Panel PC Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on the bracket. Step 8: Carefully insert the screws through the holes and gently pull the monitor downwards until the monitor rests securely in the slotted holes (Figure 3-22). Ensure that all four of the mounting screws fit snugly into their respective slotted holes.
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-23: Secure the Panel PC 3.13.2 Panel Mounting To mount the AFL3-W10A/12A/W15A-AL panel PC into a panel, please follow the steps below. Step 1: Select the position on the panel to mount the panel PC. Step 2: Cut out a section corresponding to the size shown below.
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-25: AFL-12A-AL Cutout Dimensions Figure 3-26: AFL-W15A-AL Cutout Dimensions Step 1: Slide the panel PC through the hole until the frame is flush against the panel. Step 2: Insert a M5*50 screw into the screw hole on the side of the panel mounting bracket.
AFL3-W10A/12A/W15A-AL Panel PC Step 3: Repeat Step 4 to install the other three screws into the sides of the two panel mounting brackets. Figure 3-27: Panel Mounting Kit Installation Step 4: Align the panel mounting bracket screw holes with the VESA mounting holes on the rear of the panel PC.
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-28: Securing Panel Mounting Brackets 3.13.3 Cabinet and Rack Installation The AFL3-W10A/12A/W15A-AL panel PC can be installed into a cabinet or rack. The installation procedures are similar to the panel mounting installation. To do this, please follow the steps below: NOTE: When purchasing the cabinet/rack installation bracket, make sure it is...
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-29: Rack/Cabinet Bracket Installation Step 2: Insert a M5*50 screw into the screw hole on the side of the rack mounting bracket. Then, install the following components onto the screw in sequence. See Figure 3-27. Sequence Item Photo Instruction...
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-30: Rack Mounting Kit Installation Step 4: Align the rack mounting bracket screw holes with the VESA mounting holes on the rear of the panel PC. Step 5: Secure the two rack mounting brackets to the rear of the panel PC by inserting the four retention screws into the VESA mounting holes and tightening them (Figure 3-31).
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-31: Securing Rack Mounting Brackets Step 6: Slide the panel PC with the attached rack/cabinet bracket into a rack or cabinet (Figure 3-32). Figure 3-32: Install into a Rack/Cabinet Page 46...
AFL3-W10A/12A/W15A-AL Panel PC Step 7: Once the panel PC with the attached rack/cabinet bracket has been properly inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to the front of the rack or cabinet (Figure 3-32). 3.13.4 Arm Mounting The AFL3-W10A/12A/W15A-AL is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 75 mm or a 100 mm interface pad.
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-33: Arm Mounting Retention Screw Holes (10.1") Figure 3-34: Arm Mounting Retention Screw Holes (12.1") Step 4: Secure the AFL3-W10A/12A/W15A-AL to the interface pad by inserting four retention screws through the mounting arm interface pad and into the AFL3-W10A/12A/W15A-AL.S t e p 0 : Page 48...
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-35: Arm Mounting 3.13.5 Stand Mounting To mount the AFL3-W10A/12A/W15A-AL using the stand mounting kit, please follow the steps below. Step 1: Locate the screw holes on the rear of the AFL3-W10A/12A/W15A-AL. This is where the bracket will be attached. Step 2: Align the bracket with the screw holes.
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-36: Stand Mounting (Stand-A/Bxx) 3.13.6 V-Stand Mounting (10.1" and 12.1" Models Only) To mount the AFL3-W10A-AL or the AFL3-12A-AL using the optional V-Stand mounting kit, please follow the steps below. Step 1: Carefully mark the locations of the four V-Stand screw holes on the mounting area.
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-37: Drill Pilot Holes for V-Stand Step 2: Align the screw holes on the V-Stand with the VESA mount screw holes on the system rear panel. Step 3: Insert the four VESA mount screws into the four screw holes on the system rear panel.
AFL3-W10A/12A/W15A-AL Panel PC Step 5: Align the V-Stand screw holes with the pilot holes on the mounting area. Mount the V-Stand by inserting the retention screws into the four pilot holes and tightening them. Step 6: Adjust the V-Stand to have a best viewing angle to operate the system.S t e p 0 : Figure 3-39: Secure V-Stand to Mounting Area 3.14 Powering On the System...
AFL3-W10A/12A/W15A-AL Panel PC Figure 3-40: Powering On the System 3.15 Clear CMOS If the AFL3-W10A/12A/W15A-AL fails to boot due to improper BIOS settings, the clear CMOS button clears the CMOS data and resets the system BIOS information. To do this, push the clear CMOS button for three seconds, then restart the system.
AFL3-W10A/12A/W15A-AL Panel PC 3.16 Reset the System The reset button enables user to reboot the system when the system is turned on. The reset button location is shown in Figure 3-42. Press the reset button to reboot the system. Figure 3-42: Reset Button Location 3.17 Software Installation All the drivers for the AFL3-W10A/12A/W15A-AL are available on IEI Resource Download Center (https://download.ieiworld.com).
AFL3-W10A/12A/W15A-AL Panel PC NOTE: The panel PC with projected capacitive type touchscreen and Windows 7 (or later) OS does not require touch driver installation. This is because there is a HID touch digitizer built-in driver in Windows 7 or later. 3.17.1 Driver Download To download drivers from IEI Resource Download Center, follow the steps below.
Page 70
AFL3-W10A/12A/W15A-AL Panel PC Step 3: Click the driver file name on the page and you will be prompted with the following window. You can download the entire ISO file ( ), or click the small arrow to find an individual driver and click the file name to download ( ...
AFL3-W10A/12A/W15A-AL Panel PC 4.1 Introduction A licensed copy of the BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed.
AFL3-W10A/12A/W15A-AL Panel PC Left arrow Move to the item on the left hand side Right arrow Move to the item on the right hand side Increase the numeric value or make changes Decrease the numeric value or make changes F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 key...
AFL3-W10A/12A/W15A-AL Panel PC Save & Exit – Selects exit options and loads default settings The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above. 4.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered.
AFL3-W10A/12A/W15A-AL Panel PC System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.
AFL3-W10A/12A/W15A-AL Panel PC 4.3.1 ACPI Settings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced ACPI Settings Select the highest ACPI sleep state the system ACPI Sleep State [S3 (Suspend to RAM)] will enter, when the...
AFL3-W10A/12A/W15A-AL Panel PC 4.3.2 F81866 Super IO Configuration Use the F81866 Super IO Configuration menu (BIOS Menu 4) to set or change the configurations for the serial ports. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced F81866 Super IO Configuration Set Parameters of Serial Port 1 (COMA) Super IO Chip...
AFL3-W10A/12A/W15A-AL Panel PC 4.3.2.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 5) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced Serial Port 1 Configuration Enable or Disable Serial Port (COM) Serial Port [Enabled]...
AFL3-W10A/12A/W15A-AL Panel PC IO=2F8h; Serial Port I/O port address is 2F8h and the IRQ=3, 4, 10 interrupt address is IRQ3, 4, 10 IO=3E8h; Serial Port I/O port address is 3E8h and the IRQ=3, 4, 10 interrupt address is IRQ3, 4, 10 ...
AFL3-W10A/12A/W15A-AL Panel PC Transfer Mode [RS232] Use the Transfer Mode option to select the Serial Port 2 signaling mode. RS422 Serial Port 6 signaling mode is RS-422 RS232 Serial Port 6 signaling mode is RS-232 EFAULT RS485 Serial Port 6 signaling mode is RS-485 4.3.3 iWDD H/W Monitor...
AFL3-W10A/12A/W15A-AL Panel PC +12V +DDR +5VSB +3.3V +3.3VSB 4.3.4 USB Configuration Use the USB Configuration menu (BIOS Menu 7) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.
AFL3-W10A/12A/W15A-AL Panel PC USB drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard can control the system even when there is no USB driver loaded onto the system. Enabled Legacy USB support enabled EFAULT ...
AFL3-W10A/12A/W15A-AL Panel PC 4.3.6 RTC Wake Settings The RTC Wake Settings menu (BIOS Menu 9) configures RTC wake event. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event.
AFL3-W10A/12A/W15A-AL Panel PC 4.3.7 Power Saving Configuration Use the Power Saving Configuration menu (BIOS Menu 10) to configure system to reduce power consumption in system off state. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced Power Saving Configuration Enable or Disable to reduce power consumption Power Saving Function...
AFL3-W10A/12A/W15A-AL Panel PC 4.3.8 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 11) allows the console redirection options to be configured. Console redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port. Aptio Setup Utility –...
AFL3-W10A/12A/W15A-AL Panel PC 4.3.8.1 Legacy Console Redirection Settings The Legacy Console Redirection Settings menu (BIOS Menu 12) allows the legacy console redirection options to be configured. Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. Advanced Select a COM port to Legacy Serial Redirection Port [COM1] display redirection of...
AFL3-W10A/12A/W15A-AL Panel PC 4.3.9 iEi Feature Use the iEi Feature menu (BIOS Menu 13) to configure One Key Recovery function. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function Reboot and recover Auto Recovery Function [Disabled] system automatically within 10 min, when OS...
AFL3-W10A/12A/W15A-AL Panel PC 4.4 Chipset Use the Chipset menu (BIOS Menu 14) to access the North Bridge, South Bridge, and Integrated Graphics configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Aptio Setup Utility –...
AFL3-W10A/12A/W15A-AL Panel PC 4.4.1 North Bridge Configuration Use the North Bridge menu (BIOS Menu 15) to configure the north bridge chipset. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset > Intel IGD Configuration Intel IGD Configuration > LCD Control Memory Information --------------------- : Select Screen...
AFL3-W10A/12A/W15A-AL Panel PC Primary Display [IGD] Use the Primary Display option to select the graphics controller used as the primary boot device. Configuration option is listed below: EFAULT DVMT Pre-Allocated [256MB] Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots.
AFL3-W10A/12A/W15A-AL Panel PC 4.4.1.2 LCD Control Use the LCD Control submenu (BIOS Menu 17) to select a display device which will be activated during POST. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset LCD Control Select the Video Device which will be activated Primary IGFX Boot Display [Auto]...
AFL3-W10A/12A/W15A-AL Panel PC Backlight Control Mode [LED] Use the Backlight Control Mode option to specify the backlight control mode. Configuration option is listed below. EFAULT Backlight Control Type [PWM] Use the Backlight Control Type option to specify the backlight control type. Configuration option is listed below.
AFL3-W10A/12A/W15A-AL Panel PC Restore on AC Power Loss [Last State] Use the Restore on AC Power Loss BIOS option to specify what state the system returns to if there is a sudden loss of power to the system. Power Off The system remains turned off ...
AFL3-W10A/12A/W15A-AL Panel PC 4.4.2.1 HD-Audio Configuration Use the HD-Audio Configuration menu (BIOS Menu 19) to configure the HD Audio. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset HD-Audio Configuration Enable/Disable HD-Audio HD-Audio Support [Enable] Support --------------------- : Select Screen ↑...
AFL3-W10A/12A/W15A-AL Panel PC 4.4.2.2 PCI Express Configuration Use the PCI Express Configuration menu (BIOS Menu 20) to configure the PCI Express. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset PCI Express Configuration Compliance Mode > M2_AKEY1 Enable/Disable --------------------- : Select Screen ↑...
AFL3-W10A/12A/W15A-AL Panel PC 4.4.2.3 SATA Configuration Use the SATA Configuration menu (BIOS Menu 22) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Chipset SATA Configuration Enables or Disables the STAT Controller [Enable]...
AFL3-W10A/12A/W15A-AL Panel PC 4.5 Security Use the Security menu (BIOS Menu 23) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Password Description Set Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is...
AFL3-W10A/12A/W15A-AL Panel PC 4.6 Boot Use the Boot menu (BIOS Menu 24) to configure system boot options. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard Bootup NumLock State [On] NumLock state...
AFL3-W10A/12A/W15A-AL Panel PC Quiet Boot [Disabled] Use the Quiet Boot BIOS option to select the screen display when the system boots. Disabled Normal POST messages displayed Enabled OEM Logo displayed instead of POST messages EFAULT Launch PXE OpROM [Disabled] ...
AFL3-W10A/12A/W15A-AL Panel PC 4.7 Save & Exit Use the Save & Exit menu (BIOS Menu 25) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc. Main Advanced Chipset Boot...
AFL3-W10A/12A/W15A-AL Panel PC Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options. Page 89...
AFL3-W10A/12A/W15A-AL Panel PC 5.1 System Maintenance Introduction If the components of the AFL3-W10A/12A/W15A-AL fail they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts. Back cover removal instructions for the AFL3-W10A/12A/W15A-AL are described below. 5.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the...
AFL3-W10A/12A/W15A-AL Panel PC 5.3 Turn off the Power WARNING: Failing to turn off the system before opening it can cause permanent damage to the system and serious or fatal injury to the user. Before any maintenance procedures are carried out on the system, make sure the system is turned off.
AFL3-W10A/12A/W15A-AL Panel PC Step 5: Disconnect the antenna cables on the WLAN module and remove the retention screw to release the WLAN card. Step 6: Grasp the WLAN card by the edges and carefully pull it out of the socket. Step 7: Install a new WLAN card by inserting the card into the slot at an angle.
AFL3-W10A/12A/W15A-AL Panel PC 6.1 Peripheral Interface Connectors The AFL3-W10A/12A/W15A-AL panel PC motherboard comes with a number of peripheral interface connectors and configuration jumpers. The connector locations are shown in Figure 6-1 and Figure 6-2. The Pin 1 locations of the on-board connectors are also indicated in the diagram below.
AFL3-W10A/12A/W15A-AL Panel PC 6.2 Internal Peripheral Connectors Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. The table below shows a list of the peripheral interface connectors on the AFL3MB2-AL. Pinouts of these connectors can be found in the following sections.
AFL3-W10A/12A/W15A-AL Panel PC 6.2.19 USB 2.0 Connector (RFID_USB) PIN NO. DESCRIPTION USB_DATA- USB_DATA+ Table 6-20: USB 2.0 Connector (RFID_USB) Pinouts 6.3 External Interface Panel Connectors The table below lists the rear panel connectors on the AFL2MB-15A motherboard. Pinouts of these connectors can be found in the following sections. Connector Type Label...
AFL3-W10A/12A/W15A-AL Panel PC 6.4 Preconfigured Jumper Settings CAUTION: following jumpers preconfigured AFL3-W10A/12A/W15A-AL. Users should not change these jumpers (Table 6-31). It is only for reference. Jumper Name Type Label LVDS voltage selection 6-pin header J_VLVDS1 LVDS panel resolution selection DIP switch Table 6-31: Preconfigured Jumpers 6.4.1 LVDS Panel Voltage Selection Jumper (J_VLVDS1) Description...
AFL3-W10A/12A/W15A-AL Panel PC DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive (2014/30/EU) Low-Voltage Directive (2014/35/EU) RoHS II Directive (2011/65/EU, 2015/863/EU) If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
Page 127
AFL3-W10A/12A/W15A-AL Panel PC Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2014/53/EU.
Page 128
AFL3-W10A/12A/W15A-AL Panel PC Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 2014/53/EU. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 2014/53/EU.
Page 129
AFL3-W10A/12A/W15A-AL Panel PC FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference ...
Page 130
AFL3-W10A/12A/W15A-AL Panel PC CHINA ROHS The label on the product indicates the estimated “Environmentally Friendly Use Period” (EFUP). This is an estimate of the number of years that these substances would “not leak undergo abrupt change.” This product contain replaceable sub-assemblies/components which have a shorter EFUP such as batteries and lamps.
AFL3-W10A/12A/W15A-AL Panel PC WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the AFL3-W10A/12A/W15A-AL. B.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
AFL3-W10A/12A/W15A-AL Panel PC If considerable amounts of dust, water, or fluids enter the device, turn off the power supply immediately, unplug the power cord, and contact the AFL3-W10A/12A/W15A-AL vendor. DO NOT: Drop the device against a hard surface. Strike or exert excessive force onto the LCD panel.
AFL3-W10A/12A/W15A-AL Panel PC B.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union–If you wish to dispose of used electrical and ...
AFL3-W10A/12A/W15A-AL Panel PC B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the AFL3-W10A/12A/W15A-AL, please follow the guidelines below. WARNING: For safety reasons, turn-off the power and unplug the panel PC before cleaning. If you dropped any material or liquid such as water onto the panel ...
Page 136
AFL3-W10A/12A/W15A-AL Panel PC Cloth– Although paper towels or tissues can be used, a soft, clean piece of cloth is recommended when cleaning the device. Water or rubbing alcohol–A cloth moistened with water or rubbing alcohol can be used to clean the device. Using solvents–The use of solvents is not recommended when cleaning the ...
AFL3-W10A/12A/W15A-AL Panel PC Appendix BIOS Menu Options Page 123...
Page 138
AFL3-W10A/12A/W15A-AL Panel PC System Date [xx/xx/xx] ......................61 System Time [xx:xx:xx] ....................... 61 ACPI Sleep State [S3 (Suspend to RAM)] ................62 Case Open Detection [Disabled] ..................63 Serial Port [Enabled] ......................64 Change Settings [Auto] ....................... 64 Serial Port [Enabled] ......................65 Change Settings [Auto] .......................
Page 139
AFL3-W10A/12A/W15A-AL Panel PC Bootup NumLock State [On] ....................86 Quiet Boot [Disabled] ......................87 Launch PXE OpROM [Disabled] ..................87 Option ROM Messages [Force BIOS] ................. 87 UEFI Boot [Disabled] ......................87 Save Changes and Reset ....................88 Discard Changes and Reset ....................88 Restore Defaults ........................
AFL3-W10A/12A/W15A-AL Panel PC Appendix Watchdog Timer Page 126...
Page 141
AFL3-W10A/12A/W15A-AL Panel PC NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working. The system may stop working because of external EMI or software bugs. The Watchdog Timer ensures that standalone systems like ATMs will automatically attempt to restart in the case of system problems.
Page 142
AFL3-W10A/12A/W15A-AL Panel PC NOTE: The Watchdog Timer is activated through software. The software application that activates the Watchdog Timer must also deactivate it when closed. If the Watchdog Timer is not deactivated, the system will automatically restart after the Timer has finished its countdown. EXAMPLE PROGRAM: ;...
Page 144
AFL3-W10A/12A/W15A-AL Panel PC The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.