Figure 3-21: Wall-Mounting Bracket - IEI Technology AFL3-W10A-AL User Manual

Figure 3-21: Wall-mounting Bracket

Step 6: Insert the four monitor mounting screws provided in the wall mount kit into the
four screw holes on the real panel of the panel PC and tighten until the screw
shank is secured against the rear panel (Figure 3-22).
WARNING:
Please use the M4 screws provided in the wall mount kit for the rear panel.
If the screw is missing, the thread depth of the replacement screw should
be not more than 4 mm.
Page 38
AFL3-W10A/12A/W15A-AL Panel PC