Remote Control - Kongsberg EM 712 Maintenance Manual

Kongsberg EM 712 Maintenance Manual

Remote control

The Processing Unit can be switched on/off with a remote switch. This switch is
connected to a 9–pin D-connector on the Processing Unit.
Local connection, male 9–pin
A
D-connector
Connection to remote lamp and
B
on/off switch
Female 9–pin D-connector
C
Male 9–pin D-connector
D
Minimum cable requirements
• : 3 x 0.5 mm²
Conductors
• : Overall braided
Screen
• : 60 V
Voltage
•
Maximum outer diameter
by the plugs and/or the cable gland
This cable must be provided by the
installation shipyard.
192
: Defined
451106/B