Adapter For D-Connector To Rj45 Connector For Rs-422; Adapter For D-Connector To Rj45 Connector For - Kongsberg EM 712 Maintenance Manual

Adapter for D-connector to RJ45 connector for RS-422

You can use an adapter if you need to connect a serial cable with a D-connector to the
Processing Unit.
The Processing Unit has four serial ports with RJ45 connectors. The ports can be
configured to be RS-232 or RS-422.
You can use an adapter if you need to connect a serial cable with a D-connector to the
Processing Unit. Two adapters and two standard Cat6 patch cables are provided with a
standard delivery.
The adapter has RJ45 female connector at one end and 9-pin male D-connector at the
other end. The wiring at the RJ45 side is fixed, and the wire ends have crimp contacts to
be placed in the desired position of the D-connector without any tools.
Local connection (Processing Unit)
A
RJ45 connector
Standard patch cable
B
Adapter Part number 357235
C
Wired for RS-422
Standard RS-422 cable
D
Connection on remote device
E
451106/B
Cable layout and interconnections
187