Kongsberg EM 712 Maintenance Manual
VadaTech CP219 Ethernet switch
replacement
If a VadaTech CP219 Ethernet switch fails to operate, it must be replaced with a new
switch. All replacement tasks must be done according to the specified procedures, and
you must follow the relevant safety instructions.
The VadaTech CP219 board is used as an
Ethernet switch in the EM 712 Processing Unit.
Note
These procedures will instruct you to handle
electronic circuit boards and/or modules. Before
doing so, make sure that you are familiar with the applicable handling precautions.
Follow the relevant handling procedures for circuit boards and electronic modules.
Topics
Removing the VadaTech CP219 Ethernet switch , page 53
Installing the VadaTech CP219 Ethernet switch, page 54
52
451106/B