Kongsberg EM 712 Maintenance Manual page 169

Default orientation of transducer
modules, top view, 0.5° x 0.5° system.
Each transducer module is identified
by its physical location in the array.
If mounting is in accordance with
the default orientation, the most aft
module is transmit transducer number
1 The location of the transducer
modules must be recorded during
installation and written down in the
cable identification table.
Transmit transducer (TX) num-
A
ber 1
Transmit transducer (TX) num-
B
ber 2
Receive transducer (RX) num-
C
ber 1
Receive transducer (RX) num-
D
ber 2
TX cable number 1
E
TX cable number 10
F
G RX cable number 1
RX cable number 4
H
451106/B
Cable layout and interconnections
169