Cable Plan - Receiver Unit - Kongsberg EM 712 Maintenance Manual

Kongsberg EM 712 Maintenance Manual

Cable plan - Receiver Unit

The receiver (RX) Unit cables include those used to connect the EM 712 RX Unit(s)
to AC mains power, to the transmitter (TX) Unit, to the Processing Unit and to the
transducers. If there are more than one RX Unit they have to be connected to each other
with a fibre optic cable.
The EM 712 system can have one or two Receiver Units (RXUs), depending on
the system configuration. A system with 0.5° receiver array will need two Receive
Transducer modules and two Receiver Units.
The illustrations show the Receive Transducer array mounted in the default orientation,
with the cables pointing towards stern.
160
451106/B