Remote control cable
A dedicated socket on the rear side of the Processor Unit cabinet allows you to turn on
the computer by means of a remote control switch.
Note
This connection is specific for the Nexcom NISE 3900E computer.
Socket for remote on/off switch (SW)
A
B
Remote control box
Use any type of box that fits the purpose. The switch type must be Push to make,
‑
non
locking. The connector is provided with the Processor Unit.
Minimum cable requirements
•
: 2 x 0.25 mm
Conductors
•
: None
Screen
•
: 60 V
Voltage
•
Maximum outer diameter
Related topics
Cable layout and interconnections, page 68
Cable drawings and specifications, page 93
110-0006927/A (Preliminary)
Preliminary version 2022-07-26
2
: Not applicable
Cable layout and interconnections
101