Kongsberg EM 712 Maintenance Manual page 174

Kongsberg EM 712 Maintenance Manual
Default orientation of transducer
modules, top view, 0.5° x 0.5° system.
Each transducer module is identified
by its physical location in the array.
If mounting is in accordance with
the default orientation, the port side
module is receive transducer number
1. The location of the transducer
modules must be recorded during
installation and written down in the
cable identification table.
Transmit transducer (TX) num-
A
ber 1
Transmit transducer (TX) num-
B
ber 2
Receive transducer (RX) num-
C
ber 1
D Receive transducer (RX) num-
ber 2
E TX cable number 1
TX cable number 10
F
G RX cable number 1
RX cable number 4
H
174
451106/B