Cbmf Board Replacement - Kongsberg EM 712 Maintenance Manual

Parts replacement

CBMF board replacement

If a CBMF board fails to operate, it must be replaced with a new circuit board. All
replacement tasks must be done according to the specified procedures, and you must
follow the relevant safety instructions.
The Compact Beamformer (CBMF) board is
used by the Processing Unit for beamforming
and signal processing purposes.
Note
These procedures will instruct you to handle
electronic circuit boards and/or modules. Before
doing so, make sure that you are familiar with
the applicable handling precautions. Follow the
relevant handling procedures for circuit boards
and electronic modules.
Topics
Removing the CBMF board, page 56
Installing the CBMF board, page 57
55
451106/B