Remote Control Of Receiver Unit - Kongsberg EM 712 Maintenance Manual

Remote control of Receiver Unit

Cable for switching on/off the Receiver Unit from the Processing Unit.
This cable between the Transmitter Unit and the Receiver Unit is required if you want to
switch on and off the Receiver Unit from the Processing Unit.
Transmitter Unit end, male 9–pin D-connector
A
Connects to
REMOTE ON/OFF OUT
Receiver Unit end, male 9–pin D-connector
B
Connects to
REMOTE ON/OFF IN
451106/B
Cable layout and interconnections
at the bottom of the Transmitter Unit.
at the Receiver Unit.
197