Table of Contents
Advertisement
EM 2040P
Hydrographic Work Station description
The Hydrographic Work Station is the operator station for the EM 2040P.
A dedicated maritime computer is provided with the
EM 2040P Multibeam echo sounder. It is set up with
all necessary software.
The Hydrographic Work Station is based on the
Microsoft
®
OperatingSystem operating system.
The Hydrographic Work Station is normally mounted
near the operator work space.
Rugged Hydrographic Work Station description
The Hydrographic Work Station is the operator station for the EM 2040P.
A dedicated maritime computer is provided with the
EM 2040P Multibeam echo sounder. It is set up with
all necessary software.
The Hydrographic Work Station is also available in
a semi rugged or fully rugged version for portable use.
Remote Control Unit (K-Rem) description
A dedicated junction box has been designed to provide remote on/off switches with light
indication and interface to a remote synchronizing system. The junction box contains a
terminal block and four switches with lamps mounted in the front.
Note
The Remote Control Unit is not a standard part of
the EM 2040P delivery.
The Remote Control Unit is called K-Rem. It is
prepared for remote control and interface to an external
synchronization system for four Kongsberg echo sounders.
• One Sub-bottom profiler (SBP 120 or SBP 300)
• Two EM multibeam echo sounders
• One EA single beam echo sounder
11
417420/A
Advertisement
Table of Contents
