Kongsberg EM 712 Maintenance Manual page 183

K Computer cable: From Hydrographic Work Station to keyboard (C3)
The cable is often physically attached to the keyboard, and terminated in the
"computer end" with a male PS/2 or USB connector. Depending on the type
of connector you must connect the keyboard to the PS/2 connector or an USB
connector on the computer.
L Audio cable: Not used
Audio cable: Not used
M
USB interface connectors: USB 3.0 From Hydrographic Work Station to external
N
device(s)
USB interface connectors: USB 2.0 From Hydrographic Work Station to external
O
device(s)
AC power cable: From Hydrographic Work Station to uninterruptible power supply
P
(UPS) (C7)
Q Ground cable: From Hydrographic Work Station to vessel ground (C8)
451106/B
Cable layout and interconnections
183