Optional orientation of transducer
modules, top view, 0.5° x 0.5° system.
Each transducer module is identified
by its physical location in the array.
If optional orientation is used,
the most starboard fide module is
receive transducer number 1. The
location of the transducer modules
must be recorded during installation
and written down in the cable
identification table.
Transmit transducer (TX) num-
A
ber 1
Transmit transducer (TX) num-
B
ber 2
Receive transducer (RX) num-
C
ber 1
Receive transducer (RX) num-
D
ber 2
TX cable number 1
E
TX cable number 10
F
G
RX cable number 1
RX cable number 4
H
451106/B
Cable layout and interconnections
175