Kongsberg EM 712 Maintenance Manual
A
Receiver Unit 1
B
Receiver Unit 2
C
Receive transducer module number 1
Cables from Receive Transducer module 1 are connected to Receiver Unit 1
according to the cable identification table
D
Receive transducer module number 2
Cables from Receive Transducer module 2 are connected to Receiver Unit 2
according to the cable identification table
Note
During the installation of the transducer array, you must fill in the cable identification
table.
The number of cables depends on the chosen system configuration.
• 0.5° receive transducer: 8 cables
• 1° receive transducer: 4 cables
• 2° receive transducer: 2 cables
Related topics
List of EM 712 cables, page 164
162
451106/B