Approved Anti-Fouling Paints - Kongsberg EM 712 Maintenance Manual

Approved anti-fouling paints

This is our list of approved antifouling paints for all transducer types. Always refer to
the manufacturer's documentation and data sheets for a complete procedure and for
relevant safety information.
Important
Do not paint the transducer with traditional hull plating paint. Use only the correct
type of approved paint specified.
Do not use high-pressure water, sandblasting, metal tools or strong solvents to clean
the transducer face.
Jotun
• : Jotun
Manufacturer
• P.O.Box 2021, N-3248 Sandefjord, Norway
Address:
•
Manufacturer's website
Products:
• SeaQuantum Ultra S
– : Safeguard Universal ES
Primer
Apply 80 µm wet film thickness (50 µm dry film thickness).
– : SeaQuantum Ultra S
Paint
Apply 250 µm wet film thickness (125 µm dry film thickness).
• Seaforce 200 AV
– : Safeguard Universal ES AV
Primer
Apply 70 µm wet film thickness (50 µm dry film thickness).
– : Seaforce 200 AV
Paint
Apply 140 µm wet film thickness (90 µm dry film thickness).
Data sheets and application guides can be downloaded from:
http://www.jotun.com/ww/en/b2b/technical-info/tds/index.aspx
International Marine Coatings
• : International Marine Coatings
Manufacturer
• Stoneygate Lane, Felling, Gateshead, Tyne & Wear, NE10 0JY United
Address:
Kingdom
•
Manufacturer's website
451106/B
: http://www.jotun.com
: www.international-marine.com
Preventive maintenance
41